[App_rpt-users] pfsense router?

[Michael Wolthuis]

KB8ZGL*CLI> iax2 show registry

Host                  dnsmgr  Username    Perceived             Refresh
State

67.215.233.178:4569   N       28881       24.247.58.57:4569          60
Registered

67.215.233.178:4569   N       28241       24.247.58.57:4569          60
Registered



Mine matches for both of my nodes on that machine, which is behind my
PFSense firewall.  I am actually accessing it via OpenVPN right now, as the
other person stated.

Mike

From:  Tim Sawyer <tim.sawyer at mac.com>
Date:  Friday, August 22, 2014 at 11:01 AM
To:  Michael Wolthuis <wolthuis at gmail.com>
Cc:  "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject:  Re: [App_rpt-users] pfsense router?

Mike,

Thanks I¹ll try that as soon as the pfsense router gets reinstalled. Just
for grins could you do ³iax2 show registry²? Is the perceived port correct?


*CLI> iax2 show registry
Host                  dnsmgr  Username    Perceived             Refresh
State
67.215.233.178:4569   N       2504        108.13.3.89:4569           60
Registered
--
Tim WD6AWP

> On Aug 22, 2014, at 7:56 AM, Michael Wolthuis <wolthuis at gmail.com> wrote:
> 
> Tim,
> I run PFSense with many of my Allstar nodes.  I have to set STATIC outbound
> NAT for the specific IP addresses that are Asterisk.  This will cause them to
> not pick random ports outbound.
> 
> I am not sure what iax2 show registry does, but I could not get it to work
> until I put in a static NAT outbound.
> 
> Here is a copy of my outbound NAT statement for one of my nodes:
> 
> WAN  172.16.12.22/32udp/4569*udp/4569WAN address*YES
> 
> I believe the key is the last YES, which is the STATIC PORT heading.
> 
> Hope that helps,
> Mike
> kb8zgl
> 
> 
> From:  Tim Sawyer <tim.sawyer at mac.com>
> Date:  Friday, August 22, 2014 at 10:52 AM
> To:  "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> Subject:  [App_rpt-users] pfsense router?
> 
> Is anyone using a pfsense router in your Asterisk network? While app_rpt seems
> to work fine it shows a weird port, not 4569, with ³iax2 show registry². I
> assume pfsense is doing something weird with NAT that I don¹t understand. Can
> anyone shed some light on this subject?
> 
> 
> 
> --
> Tim WD6AWP
> 
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-u
> sers To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe or
> edit options button" You do not need a password to unsubscribe, you can do it
> via email confirmation. If you have trouble unsubscribing, please send a
> message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe or
> edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to the
> list detailing the problem.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140822/f3390abe/attachment.html>