[App_rpt-users] TKR-840 issue

[Ramesh Dhami]

Hi Chris,

I have the TKR850 at my site.  I actually use mine I'm a dual mode DV and FM application.

You are right, the data input is limited - so I use the TD input for my GMSK (DV) input.  I feed my Allstar audio into the TA input.  I use an external MUX to gate the audio, so when In the FM mode, in addition to feeding the Allstar audio into the TA input, I feed the PL into the TD input.

I have been using my 850 in this arrangement for about 3 years now.

Ramesh.

Sent from my iPhone

> On Feb 3, 2014, at 9:50 PM, Chris Bunting <chris at lancnet.com> wrote:
> 
> Was setting up the master site for my simulcast system over the
> weekend, but ran into a roadblock, any help would be appreciated.
> 
> When feeding flat Audio into "transmit data" input , the repeater
> maxes out at 2k deviation, no matter how much audio I feed it.
> 
> I could use the transmit audio input, but then I can't feed PL among
> other things into it, along with many other reasons not to use tx
> audio.
> 
> Anyone experience this with the kenwood highline series repeaters?
> 
> What is everyone out there using? I'm ready to auction my 2 kenwood's
> off and buy something else if this can't be overcome. The reason I
> went with the 840 and 830 is it had a 10 meg input for the clock.
> 
> 
> Thanks,
> Chris Bunting
> Lancaster Networks, LLC | Lancaster Towers, LLC
> 717-459-4321
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.