[App_rpt-users] TKR-840 issue

[Ramesh Dhami]

Oh and IIRC, I was able to disable the preemphasis on the TA line.  The settings s/w provides this option.

Sent from my iPhone

> On Feb 3, 2014, at 10:04 PM, Ramesh Dhami <Ramesh at va3uv.com> wrote:
> 
> Hi Chris,
> 
> I have the TKR850 at my site.  I actually use mine I'm a dual mode DV and FM application.
> 
> You are right, the data input is limited - so I use the TD input for my GMSK (DV) input.  I feed my Allstar audio into the TA input.  I use an external MUX to gate the audio, so when In the FM mode, in addition to feeding the Allstar audio into the TA input, I feed the PL into the TD input.
> 
> I have been using my 850 in this arrangement for about 3 years now.
> 
> Ramesh.
> 
> Sent from my iPhone
> 
>> On Feb 3, 2014, at 9:50 PM, Chris Bunting <chris at lancnet.com> wrote:
>> 
>> Was setting up the master site for my simulcast system over the
>> weekend, but ran into a roadblock, any help would be appreciated.
>> 
>> When feeding flat Audio into "transmit data" input , the repeater
>> maxes out at 2k deviation, no matter how much audio I feed it.
>> 
>> I could use the transmit audio input, but then I can't feed PL among
>> other things into it, along with many other reasons not to use tx
>> audio.
>> 
>> Anyone experience this with the kenwood highline series repeaters?
>> 
>> What is everyone out there using? I'm ready to auction my 2 kenwood's
>> off and buy something else if this can't be overcome. The reason I
>> went with the 840 and 830 is it had a 10 meg input for the clock.
>> 
>> 
>> Thanks,
>> Chris Bunting
>> Lancaster Networks, LLC | Lancaster Towers, LLC
>> 717-459-4321
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.