[App_rpt-users] audio radio to internet issue

[ea8ee]

usb27305
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=88.5
rxctcssfreqs=88.5
;rxctcssoverride=0
ctcssfrom=usb
rxdemod=no
txprelim=no
txlimonly=no
txtoctype=notone
txmixa=composite
txmixb=composite
invertptt=0
duplex=0
rxondelay=o
rxnoisefiltype=0
eeprom=1

The DMK works nice in TX but in RX not receive nothing



2014-02-08 20:02 GMT+00:00 Doug Crompton <doug at crompton.com>:

> I think it found your adapter as you said you had audio in one direction.
> If not see below.
>
> Did you select the active usb device in the config utility before you
> tried to make changes?
>
>
> If the adapter is not being found at all try this....
>
> The following USB interfaces are defined in usbradio -
>
> #define C108_VENDOR_ID          0x0d8c
> #define C108_PRODUCT_ID         0x000c
> #define C108AH_PRODUCT_ID       0x013c
> #define C119_PRODUCT_ID         0x0008
> #define C119A_PRODUCT_ID        0x013a
> #define N1KDO_PRODUCT_ID        0x6a00
> #define C108_HID_INTERFACE      3
>
> When you boot up you should see one of these initialized in the messages.
> After boot do -
>
> dmesg | more
>
> and page through and see if it found your adapter.
>
> I am using the DMK and it looks like this -
>
> [root at WA3DSP_Allstar wa3dsp]# dmesg | grep Sound
> input: C-Media Electronics Inc.       USB PnP Sound Device as
> /class/input/input0
> input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc.       USB
> PnP Sound Device] on usb-0000:00:1d.0-1
>
>
>
> *73 Doug WA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> From: ea8ee1 at gmail.com
> Date: Sat, 8 Feb 2014 19:14:56 +0000
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] audio radio to internet issue
>
>
> I tried with  cli and radio tune rxnoise and the pc says the device
> usb27305 currectly not active ! any suggestion?
>
>
> 2014-02-08 8:51 GMT+00:00 jose <ea8ee1 at gmail.com>:
>
>  Hi Doug! the ptt and audio from internet to radio works nicely the
> problem is about the audio from radio to internet not audio neither the
> node receive the dmtf from radio or webstransceiver
>
> El 08/02/2014 6:31, Doug Crompton escribió:
>
> You need to set -
>
> duplex=1  ; Simplex, no telelmetry
> duplex=0  ; Simplex, telelmetry
>
> in rpt.conf if you are running simplex.
>
> Also make sure the polarity is correct in your usbradio or simpleusb file
> for the PTT and COS if you are using it.
>
>
>
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140208/78b824d3/attachment.html>