[App_rpt-users] audio radio to internet issue

[REDBUTTON_CTRL]

Oh and set ctcssfrom=no
That way it wont be looking for a tone decoder output to let audio in.
Jon RQ

On 2/8/2014 5:39 PM, REDBUTTON_CTRL wrote:
> If this is your usb radio.conf file then it is missing a couple of things.
>
> You need the following:
>
> carrierfrom=usb (or usbinvert if your cor is active low)
>
> and the rxdemod must be set to speaker or flat
>
> That should get tit listening to rx audio to start.
>
> Jon VA3RQ
>
> On 2/8/2014 5:31 PM, ea8ee wrote:
>> usb27305
>> rxboost=1
>> txboost=1
>> rxctcssrelax=1
>> txctcssdefault=88.5
>> rxctcssfreqs=88.5
>> ;rxctcssoverride=0
>> ctcssfrom=usb
>> rxdemod=no
>> txprelim=no
>> txlimonly=no
>> txtoctype=notone
>> txmixa=composite
>> txmixb=composite
>> invertptt=0
>> duplex=0
>> rxondelay=o
>> rxnoisefiltype=0
>> eeprom=1
>>
>> The DMK works nice in TX but in RX not receive nothing
>>
>>
>>
>> 2014-02-08 20:02 GMT+00:00 Doug Crompton <doug at crompton.com 
>> <mailto:doug at crompton.com>>:
>>
>>     I think it found your adapter as you said you had audio in one
>>     direction. If not see below.
>>
>>     Did you select the active usb device in the config utility before
>>     you tried to make changes?
>>
>>
>>     If the adapter is not being found at all try this....
>>
>>     The following USB interfaces are defined in usbradio -
>>
>>     #define C108_VENDOR_ID          0x0d8c
>>     #define C108_PRODUCT_ID         0x000c
>>     #define C108AH_PRODUCT_ID       0x013c
>>     #define C119_PRODUCT_ID         0x0008
>>     #define C119A_PRODUCT_ID        0x013a
>>     #define N1KDO_PRODUCT_ID        0x6a00
>>     #define C108_HID_INTERFACE      3
>>
>>     When you boot up you should see one of these initialized in the
>>     messages. After boot do -
>>
>>     dmesg | more
>>
>>     and page through and see if it found your adapter.
>>
>>     I am using the DMK and it looks like this -
>>
>>     [root at WA3DSP_Allstar wa3dsp]# dmesg | grep Sound
>>     input: C-Media Electronics Inc.       USB PnP Sound Device as
>>     /class/input/input0
>>     input,hidraw0: USB HID v1.00 Device [C-Media Electronics
>>     Inc.       USB PnP Sound Device] on usb-0000:00:1d.0-1
>>
>>     *73 Doug
>>     WA3DSP
>>     http://www.crompton.com/hamradio*
>>
>>
>>     ------------------------------------------------------------------------
>>     From: ea8ee1 at gmail.com <mailto:ea8ee1 at gmail.com>
>>     Date: Sat, 8 Feb 2014 19:14:56 +0000
>>     To: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
>>     Subject: Re: [App_rpt-users] audio radio to internet issue
>>
>>
>>     I tried with  cli and radio tune rxnoise and the pc says the
>>     device usb27305 currectly not active ! any suggestion?
>>
>>
>>     2014-02-08 8:51 GMT+00:00 jose <ea8ee1 at gmail.com
>>     <mailto:ea8ee1 at gmail.com>>:
>>
>>         Hi Doug! the ptt and audio from internet to radio works
>>         nicely the problem is about the audio from radio to internet
>>         not audio neither the node receive the dmtf from radio or
>>         webstransceiver
>>
>>         El 08/02/2014 6:31, Doug Crompton escribió:
>>
>>             You need to set -
>>
>>             duplex=1  ; Simplex, no telelmetry
>>             duplex=0  ; Simplex, telelmetry
>>
>>             in rpt.conf if you are running simplex.
>>
>>             Also make sure the polarity is correct in your usbradio
>>             or simpleusb file for the PTT and COS if you are using it.
>>
>>
>>
>>
>>     _______________________________________________ App_rpt-users
>>     mailing list App_rpt-users at ohnosec.org
>>     <mailto:App_rpt-users at ohnosec.org>
>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To
>>     unsubscribe from this list please visit
>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>     scroll down to the bottom of the page. Enter your email address
>>     and press the "Unsubscribe or edit options button" You do not
>>     need a password to unsubscribe, you can do it via email
>>     confirmation. If you have trouble unsubscribing, please send a
>>     message to the list detailing the problem.
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140208/92033c88/attachment.html>