[App_rpt-users] source of USB CM108 FOBs - CHEAP
George Csahanin
george at dyb.com
Sun Feb 9 08:04:27 UTC 2014
Just pulled one apart
Potted
GeorgeC
-----Original Message-----
From: Scott Zimmerman
Sent: Saturday, February 08, 2014 11:31 AM
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] source of USB CM108 FOBs - CHEAP
The biggest question is: Are these CM108's the "potted" variety that cannot
be modified for PTT use,
or are they actual IC's where one can access and solder to the pins? The
only way to tell is to
crack the case.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
On 2/8/2014 10:25 AM, George Csahanin wrote:
> I bought some CM108 fobs on EBAY for $0.99 each. He has a s***load of
> them. Not knowing if they’d be
> real CM108 I waited till I got them to send this note. The USB ID is
> 08dc:000c the real thing.
> The last four nodes I built up use D945 motherboards which have parallel
> ports, which I use for
> COS/PTT and the USB fob only does audio. No need to modify them for PTT
> and COS, etc.
> Anyhow, the EBAY auction is 300503465055 OR click this link
> <http://www.ebay.com/itm/300503465055?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649>
> Seller’s store is circle607. They’re in Hong Kong. But the postage was
> under $1.20 for all ten.
> I stocked up simply because they work so well, cost so little, and not
> sure when they will stop
> being available. (hoarding 101)
> GeorgeC
> W2DB
> Allstar 2360
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
More information about the App_rpt-users
mailing list