[App_rpt-users] Host not acknowledging non-GPS disciplined operation

[Craig Sande]

No problem Jim.  After looking at how others set up voter.conf I found a
syntax issue.  Once corrected, everything has worked flawlessly.  My
initial voter.conf was missing the [40586] line and had 1259 =
xxxx,nodeemp,transmit,ulaw.  (1259 is the serial number for my RTCM.) My
functioning version of voter.comf is:

; chan_voter configuration
;
;
[general]
port = 667
buflen = 300
password = xxxx

[40586]
40586 = xxxx,nodeemp,transmit
plfilter = y

My only question mark left is whether or not to use "ulaw" (as I saw in a
version sent to me) or "mulaw" in the line.

Craig, AE7I


On Sun, Feb 9, 2014 at 10:56 AM, Jim Duuuude <telesistant at hotmail.com>wrote:

> Well, that whole thing is just a LWEM (Lousily-worded error message) (I
> can say that, as I was
> the one who lousily-worded it!).
>
> It simply means, that, while in a mode that is non-GPS oriented, the
> server is not accepting the
> connection. It could be from a number of mis-configurations, such
> incorrect password, a Voter.conf
> set up with a master, but with no master present, etc.. there could be
> many.
>
> Jim WB6NIL
>
>
> ------------------------------
> Date: Sat, 8 Feb 2014 17:45:26 -0800
> From: cmsande at gmail.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Host not acknowledging non-GPS disciplined
> operation
>
>
> I am new to All-Star and have set up a server on an Intel i3 and am trying
> to get it to work with my RTCM acquired from Micro-Node.  I had it linking
> to Mark's server at Micro-Node, but when I tried to set up my server using
> the same settings in voter.conf and rpt.conf I get the following error
> message on the RTCM repeatedly scrolling down the screen:
>
> <System Time Not Set>  ERROR!  Host not acknowledging non-GPS disciplined
> operation.
>
> If I change the Host password on the RTCM, it will stop scrolling the
> error message, but of course is not connected.  I am uncertain as to where
> I should look to debug the issue.  Any thoughts?
>
> Craig Sande
> AE7I
> Node 40586
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140209/df30647e/attachment.html>