[App_rpt-users] Phone Patch DTMF Time to Dial ?

[Andrew Sylthe]

Mike,

I just looked at the app_rpt.c code and found this:  #define DTMF_TIMEOUT 3

So essentially there is a 3 second DTMF command timeout if I'm reading this
correctly.  You could try and change the timeout and recompile Asterisk.


On Wed, Feb 19, 2014 at 12:40 PM, <mike at midnighteng.com> wrote:

>
> Well, Thanks for that but "I wonder if the parameters are in milliseconds
> or seconds"?
>
> Problem is from using iaxRPT to test what I was doing.
>
> It sends a string after a completed dtmf entry.
>
> Before I could finish entering the string in iaxRPT -autopach dialtime was
> timing out from the lack of 1st digit not yet received because the program
> is sending it as iax data in a string.
>
> I don't have it in front of me know but it might change things if I were
> not sending it as iax through the program as a direct entry but engaging
> the tx and sending. I'll try that one tonight. I guess it's dependant on
> the iaxRPT program. It's not a problem on radio side.
>
> ...mike/kb8jnm
>
>
> -------- Original Message --------
> Subject: Re: [App_rpt-users] Phone Patch DTMF Time to Dial ?
> From: Andrew Sylthe <asylthe at kc9ona.com>
> Date: Wed, February 19, 2014 12:43 pm
> To: "mike at midnighteng.com" <mike at midnighteng.com>
> Cc: app_rpt-users at ohnosec.org
>
> Hello Mike,
>
> I found the following app_rpt Autopatch howto:
> http://ohnosec.org/drupal/node/63
>
> There appears to be a dialtime= setting that allows you to specify time
> allowed between DTMF digits.  I'm not sure if that's what you're looking
> for or not.  I would have to see your asterisk dialplan / configuration to
> help diagnose further.
>
>
>
> On Wed, Feb 19, 2014 at 9:15 AM, <mike at midnighteng.com> wrote:
>
>>
>>
>> Hello All,
>>
>> I am looking for the timer/setting for the length of time I have to enter
>> a DTMF string while conducting a phone patch. I keep getting cut off
>> because of the pre-dial string I have selecting the external PBX and trunk
>> of the outgoing line (many digits total).
>>
>> It seems to be less than 4 seconds.
>>
>> Got any experience with this one?
>>
>> ...mike/kb8jnm
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
> Andrew Sylthe
> KC9ONA
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Andrew Sylthe
KC9ONA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140219/a18af8e6/attachment.html>