[App_rpt-users] Touch Tones

[Doug Crompton]

Someone should update the article!
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Thu, 20 Feb 2014 08:00:10 -0500
From: jrorke at cogeco.ca
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Touch Tones


  
    
  
  
    This article does not tell the whole story on propagate DTMF.

    

    The statement::

    propagate_dtmf=yes

    

    Must be in the node stanza of the node you want to generate DTMF. 

    But the actual command prefix is not mentioned in the article.

    So if you have this set up in your node and then at the cli you send
    : 

    

    rpt fun (node) X40(DTMF sequence)

    

    The *40 is the command prefix needed to be sent before and DTMF
    tones. 

    I thought for years that this didn't work until Tim K4KWQ pointed
    out the command prefix. 

    Its the missing piece of the puzzle

    

    With this I can command a hardware controller via the Allstar node
    connected to it.

    

    Jon VA3RQ

    

    

    On 2/19/2014 10:55 PM, Chris Andrist
      wrote:

    
    
      
      Here is the documentation on it. http://ohnosec.org/drupal/node/134

        

        
          --
        
          Regards,
        
          

        
        
          Chris Andrist, KC7WSU
      
      

        On Feb 19, 2014, at 8:53 PM, "David Powell-Williams" <dpowellwilliams at shaw.ca>
        wrote:

        

      
      
        Perhaps 'propagate_dtmf=yes' (!= propogate)

          

          73,

          David

          VE7MQ

          

          

          ---

          This email is free from viruses and malware because
            avast! Antivirus protection is active.

          http://www.avast.com

          

          _______________________________________________

          App_rpt-users mailing list

          App_rpt-users at ohnosec.org

          http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

          

          To unsubscribe from this list please visit 
              http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
            and scroll down to the bottom of the page. Enter your email
            address and press the "Unsubscribe or edit options button"

          You do not need a password to unsubscribe, you can do it
            via email confirmation. If you have trouble unsubscribing,
            please send a message to the list detailing the problem.
          

        
      
      

      
      

      _______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
    
    

  


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140220/1efe9143/attachment.html>