[App_rpt-users] Touch Tones

[Angelo Glorioso]

Well, If I wanted to control another remote base (HF) outside of asterisk, 
it would require that tones be passed over there air. Command line would not 
work.


----- Original Message ----- 
From: "Tim Sawyer" <tim.sawyer at mac.com>
To: "Angelo Glorioso" <n5uxt at hotmail.com>
Cc: "Buddy Brannan" <buddy at brannan.name>; "app_rpt mailing list" 
<app_rpt-users at ohnosec.org>
Sent: Thursday, February 20, 2014 9:44 AM
Subject: Re: [App_rpt-users] Touch Tones


Understood. How about having a command or two that would send the TTs you 
want? http://ohnosec.org/drupal/node/94

--
Tim
:wq

On Feb 20, 2014, at 7:21 AM, Angelo Glorioso <n5uxt at hotmail.com> wrote:

> Hi Tim,
>
> Thanks all for the replies. I was trying to pass the tones via RF. Not to 
> the next node per say.
>
> 73 de Angelo
>
>
> ----- Original Message ----- From: "Tim Sawyer" <tim.sawyer at mac.com>
> To: "Buddy Brannan" <buddy at brannan.name>
> Cc: "app_rpt mailing list" <app_rpt-users at ohnosec.org>
> Sent: Thursday, February 20, 2014 9:10 AM
> Subject: Re: [App_rpt-users] Touch Tones
>
>
> Yes, Buddy you have it right. Let’s break it down:
>
> * is the prefix, AKA the function (or start) character. 
> http://ohnosec.org/drupal/node/133
>
> 4 is command mode (you exit with #). http://ohnosec.org/drupal/node/21
>
> 0 is a shortcut for last node number
>
> So for propagate_dtmf to work you have to connect to the remote node and 
> then go into command mode.
>
> --
> Tim
> :wq
>
> On Feb 20, 2014, at 6:30 AM, Buddy Brannan <buddy at brannan.name> wrote:
>
>> Wouldn’t it have to be *4[node number] to guarantee that you’re 
>> commanding the right node? *4 is the command to send commands to a remote 
>> node, thus *40 would specify to control the most recently connected node, 
>> is that not correct? Or did I get the wrong end of this?
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.
>