[App_rpt-users] Touch Tones

[Tim Sawyer]

Understood. How about having a command or two that would send the TTs you want? http://ohnosec.org/drupal/node/94

--
Tim
:wq

On Feb 20, 2014, at 7:21 AM, Angelo Glorioso <n5uxt at hotmail.com> wrote:

> Hi Tim,
> 
> Thanks all for the replies. I was trying to pass the tones via RF. Not to the next node per say.
> 
> 73 de Angelo
> 
> 
> ----- Original Message ----- From: "Tim Sawyer" <tim.sawyer at mac.com>
> To: "Buddy Brannan" <buddy at brannan.name>
> Cc: "app_rpt mailing list" <app_rpt-users at ohnosec.org>
> Sent: Thursday, February 20, 2014 9:10 AM
> Subject: Re: [App_rpt-users] Touch Tones
> 
> 
> Yes, Buddy you have it right. Let’s break it down:
> 
> * is the prefix, AKA the function (or start) character. http://ohnosec.org/drupal/node/133
> 
> 4 is command mode (you exit with #). http://ohnosec.org/drupal/node/21
> 
> 0 is a shortcut for last node number
> 
> So for propagate_dtmf to work you have to connect to the remote node and then go into command mode.
> 
> --
> Tim
> :wq
> 
> On Feb 20, 2014, at 6:30 AM, Buddy Brannan <buddy at brannan.name> wrote:
> 
>> Wouldn’t it have to be *4[node number] to guarantee that you’re commanding the right node? *4 is the command to send commands to a remote node, thus *40 would specify to control the most recently connected node, is that not correct? Or did I get the wrong end of this?
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>