[App_rpt-users] Touch Tones

[Corey Dean]

It would still be nice if it was an option.  For example…  Say the allstar node was a hub and I had a couple of rf links from other repeaters to the hub.  I would want the hub to pass the DTMF so the other repeaters could hear it.  I ask for it years ago and was told it wouldn’t happen.  It would be very nice to be able to have it available as a cop command.

Corey  N3FE

From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bryan D. Boyle
Sent: Thursday, February 20, 2014 11:47 AM
To: app_rpt mailing list
Subject: Re: [App_rpt-users] Touch Tones

i don't get why people would want to pass DTMF over the output of the repeater.  besides being anoying, it exposes your control sequence to disclosure (record, playback) and is generally considered obnoxious.

here's an idea: buy a receiver board from hamtronics or bash an old mobile to get discriminator out to a URI, split the receive antenna line at the site, set up a receive node on some oddball non-interfering frequency, and code what you want into scripts and/or commands in rpt.conf.  set your mobile/ht to same oddball frequency, and pound away on the keypad to your heart's content without blowing the speakers out of the radios that may be tuned to your repeater output and turning folks off to using said mschine.

it's called 'out-of-band' control.
--
Bryan
Sent from my iPhone 5...small
keyboard, big fingers...please
forgive misspellings...



On Feb 20, 2014, at 11:32, <mike at midnighteng.com<mailto:mike at midnighteng.com>> wrote:

Tim and Angelo,

Can you make some macros and use ilink commands 200-215 to generate dtmf strings ? Could give you limited functionality. ???

It has been a bit of a standard with other controllers that to pass dtmf through, you just needed to start with a "#" and later digits would pass.
Any chance we could have that functionality?


...mike/kb8jnm


-------- Original Message --------
Subject: Re: [App_rpt-users] Touch Tones
From: Angelo Glorioso <n5uxt at hotmail.com<mailto:n5uxt at hotmail.com>>
Date: Thu, February 20, 2014 11:09 am
To: "Tim Sawyer" <tim.sawyer at mac.com<mailto:tim.sawyer at mac.com>>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org<mailto:app_rpt-users at ohnosec.org>>

Yes I have. It does not support the radio I want to use. You would think
passing tones via RF would be an easy thing to do.


----- Original Message -----
From: "Tim Sawyer" <tim.sawyer at mac.com<mailto:tim.sawyer at mac.com>>
To: "Angelo Glorioso" <n5uxt at hotmail.com<mailto:n5uxt at hotmail.com>>
Cc: "Buddy Brannan" <buddy at brannan.name<mailto:buddy at brannan.name>>; "app_rpt mailing list"
<app_rpt-users at ohnosec.org<mailto:app_rpt-users at ohnosec.org>>
Sent: Thursday, February 20, 2014 10:03 AM
Subject: Re: [App_rpt-users] Touch Tones


App_rpt supports some HF radios. http://ohnosec.org/drupal/node/191 Have you
looked into doing it that way?

--
Tim
:wq

On Feb 20, 2014, at 7:56 AM, Angelo Glorioso <n5uxt at hotmail.com<mailto:n5uxt at hotmail.com>> wrote:

> Well, If I wanted to control another remote base (HF) outside of asterisk,
> it would require that tones be passed over there air. Command line would
> not work.
>
>
> ----- Original Message ----- From: "Tim Sawyer" <tim.sawyer at mac.com<mailto:tim.sawyer at mac.com>>
> To: "Angelo Glorioso" <n5uxt at hotmail.com<mailto:n5uxt at hotmail.com>>
> Cc: "Buddy Brannan" <buddy at brannan.name<mailto:buddy at brannan.name>>; "app_rpt mailing list"
> <app_rpt-users at ohnosec.org<mailto:app_rpt-users at ohnosec.org>>
> Sent: Thursday, February 20, 2014 9:44 AM
> Subject: Re: [App_rpt-users] Touch Tones
>
>
> Understood. How about having a command or two that would send the TTs you
> want? http://ohnosec.org/drupal/node/94
>
> --
> Tim
> :wq
>
> On Feb 20, 2014, at 7:21 AM, Angelo Glorioso <n5uxt at hotmail.com<mailto:n5uxt at hotmail.com>> wrote:
>
>> Hi Tim,
>>
>> Thanks all for the replies. I was trying to pass the tones via RF. Not to
>> the next node per say.
>>
>> 73 de Angelo
>>
>>
>> ----- Original Message ----- From: "Tim Sawyer" <tim.sawyer at mac.com<mailto:tim.sawyer at mac.com>>
>> To: "Buddy Brannan" <buddy at brannan.name<mailto:buddy at brannan.name>>
>> Cc: "app_rpt mailing list" <app_rpt-users at ohnosec.org<mailto:app_rpt-users at ohnosec.org>>
>> Sent: Thursday, February 20, 2014 9:10 AM
>> Subject: Re: [App_rpt-users] Touch Tones
>>
>>
>> Yes, Buddy you have it right. Let’s break it down:
>>
>> * is the prefix, AKA the function (or start) character.
>> http://ohnosec.org/drupal/node/133
>>
>> 4 is command mode (you exit with #). http://ohnosec.org/drupal/node/21
>>
>> 0 is a shortcut for last node number
>>
>> So for propagate_dtmf to work you have to connect to the remote node and
>> then go into command mode.
>>
>> --
>> Tim
>> :wq
>>
>> On Feb 20, 2014, at 6:30 AM, Buddy Brannan <buddy at brannan.name<mailto:buddy at brannan.name>> wrote:
>>
>>> Wouldn’t it have to be *4[node number] to guarantee that you’re
>>> commanding the right node? *4 is the command to send commands to a
>>> remote node, thus *40 would specify to control the most recently
>>> connected node, is that not correct? Or did I get the wrong end of this?
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
>> to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

--
This message has been scanned for viruses and dangerous content, and is believed to be clean.
Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=0D53D8093B.A8886&token=660e288378e1b857b42a68dbe9bcb679>


--
This message has been scanned and is believed to be clean.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140220/96d76493/attachment.html>