[App_rpt-users] Echolink database

[Bob]

The "1" is the argument count.. an integer number of arguments passed to the
routine. It is a C and C++ thing. In this case, the node number is a single
argument being passed to the routine that returns the nodename|callsign|IP
address. See code below. 

 

Bob

kk6ecm

 

+* CLI extensions
+*/
+
+/* Debug mode */
+static int el_do_debug(int fd, int argc, char *argv[]);
+static int el_do_dbdump(int fd, int argc, char *argv[]);
+static int el_do_dbget(int fd, int argc, char *argv[]); argc ("argument
count") 
+
+static char debug_usage[] =
+"Usage: echolink debug level {0-7}\n"
+"       Enables debug messages in app_rpt\n";
+
+static char dbdump_usage[] =
+"Usage: echolink dbdump [nodename|callsign|ipaddr]\n"
+"       Dumps entire echolink db\n";
+
+static char dbget_usage[] =
+"Usage: echolink dbget <nodename|callsign|ipaddr> <lookup-data>\n"
+"       Looks up echolink db entry\n";
 

 

  _____  

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Doug Crompton
Sent: Saturday, January 18, 2014 10:17 AM
To: Tim Sawyer
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Echolink database

 

Tim (and all),

OK on rpt.conf. CCing this to the forum.

I  think my confusion was between the xipar and acid Allstar versions.
Apparently the xipar version uses the  echolink/sl0   stanza setting. 

Also I will be adding echolink call lookup to lsnodes for those that have
echolink enabled. 

Can anyone can explain the third parameter (shown as 1 below) for 'echolink
dbget' ?  It seems that it does not matter what it is but it has to be
there.

WA3DSP_Allstar*CLI> echolink dbget 1 147090
147090|WA3DSP-L|50.191.8.33

WA3DSP_Allstar*CLI> echolink dbget
Usage: echolink dbget <nodename|callsign|ipaddr> <lookup-data>
       Looks up echolink db entry


73 Doug
WA3DSP
http://www.crompton.com/hamradio



  _____  

From: tim.sawyer at mac.com
Subject: Re: Echolink database
Date: Sat, 18 Jan 2014 07:55:52 -0800
To: doug at crompton.com

Sorry I didn't read your note thoroughly. Yes, zap/pseudo is the way to do
it with no radio. Just add another node to your system and point echolink at
it.

--

Tim

:wq


On Jan 17, 2014, at 10:55 PM, Doug Crompton <doug at crompton.com> wrote:

Tim,

What is the proper way to install echolink in rpt.conf ?

I tried -

rxchannel=echolink/el0

and on restart it failed - would not enter cli.

This is the way it is shown in the examples.

When I use -

rxchannel=Zap/pseudo

It works. In both cases the echolink.conf points to this stanza.

I want to have a node just for echolink. No radio. I will connect to radio
node as desired.

Echolink seems to work with the pseudo channel, someone connected to me and
we communicated.

73 Doug
WA3DSP
http://www.crompton.com/hamradio




  _____  


 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140118/fb6a52f5/attachment.html>