[App_rpt-users] rpt.conf

[Geoff]

On 01/22/2014 09:32 AM, Tim Sawyer wrote:
> After you make changes to rpt.conf, are you restarting asterisk with “service asterisk restart” or “rpt reload”?
> --
>

Hi, Tim - well, I did it a couple of different ways...

/etc/init.d/asterisk stop

then

/etc/init.d/asterisk restart

Of course, shutting down asterisk failed (it was already stopped) but 
restarting was just fine.
When that didn't change anything, I thought "well, they're probably 
doing something funky with the scripting".  So,

~#>astdn.sh
and
~#>astup.sh

were used.  The issue remained.

Bob said (and this seems to hold true with what a friend said he thinks 
he remembers on the subject) that the example of rpt.conf says that the 
morse stanza would be the same for all nodes.  With that explanation, it 
would make sense to still define different morse stanzas, for different 
callsigns, but that the telemetry and CW ID frequencies would be the 
same throughout all nodes.  Only the CW strings would change.  This is 
the case in my situation.

-Geoff