[App_rpt-users] RTCM Question

[41.2 Jim]

My mistake, as I found I had calibrated the squelch with the squelch pot at
600+(doing a 98status) and found that with the squelch pot all the way down
first then, the squelch calibrates at 92 and when turned up to 400+ starts
working much better ...it is just that when using a URI the very same
people/signal had no tail at all,  prob only way back to that with an RTCM
is with a micor squelch chip


   Jim Frederick KF6QBW
446.600-  100.0 PL Repeater
     AllStar Node # 28839
         Skype = jim41.2


On Tue, Jan 28, 2014 at 1:30 AM, Chuck Henderson <
rpt2 at chuck.midlandsnetworking.com> wrote:

> Have you updated your RTCM to the latest firmware from SVN<http://svn.ohnosec.org/viewvc/projects/allstar/voter/?root=svn>?
> Are you setup to compile your own firmware?
>
>
> On Mon, Jan 27, 2014 at 8:43 PM, 41.2 Jim <41.2jim at gmail.com> wrote:
>
>>  Question.... is their anything that is universal to both Stanzas,
>> "usbradio.conf & voter.conf" that can be used with an RTCM like say ....
>> rxsquelchdelay=xx or rxondelay=xx as I am tring to rid my repeater of a
>> low signal squelch tail while using a PL board(TS-64 in decode only) and
>> with the RTCM providing squelch, A kerchunk will get a long squelch tail
>> ???... was not an issue with the URIx and DSP
>> have the squelch at 7 turns past minimum gating and still get a long
>> crash ??
>>
>> Thank you all, in advance, for your time
>>
>>    Jim Frederick KF6QBW
>> 446.600-  100.0 PL Repeater
>>      AllStar Node # 28839
>>          Skype = jim41.2
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140128/68e9cdb1/attachment.html>