[App_rpt-users] RTCM Question

[Chuck Henderson]

Have you updated your RTCM to the latest firmware from
SVN<http://svn.ohnosec.org/viewvc/projects/allstar/voter/?root=svn>?
Are you setup to compile your own firmware?


On Mon, Jan 27, 2014 at 8:43 PM, 41.2 Jim <41.2jim at gmail.com> wrote:

>  Question.... is their anything that is universal to both Stanzas,
> "usbradio.conf & voter.conf" that can be used with an RTCM like say ....
> rxsquelchdelay=xx or rxondelay=xx as I am tring to rid my repeater of a
> low signal squelch tail while using a PL board(TS-64 in decode only) and
> with the RTCM providing squelch, A kerchunk will get a long squelch tail
> ???... was not an issue with the URIx and DSP
> have the squelch at 7 turns past minimum gating and still get a long crash
> ??
>
> Thank you all, in advance, for your time
>
>    Jim Frederick KF6QBW
> 446.600-  100.0 PL Repeater
>      AllStar Node # 28839
>          Skype = jim41.2
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140128/9c18bf26/attachment.html>