[App_rpt-users] Help getting started with RTCM and ACID

[Tim Sawyer]

You need to change the rxchannel in rpt.conf

[28989]                                  ; Change this to your assigned node number 
rxchannel = Voter/28989                  ; Voter

--
Tim
:wq

On Jan 30, 2014, at 7:22 AM, Chris Bunting <chris at lancnet.com> wrote:

> I have 2 RTCM boxes configured, and an ACID install. I figured out I
> needed to create a voter.conf file, and it is as follows:
> 
> [general]
> port = 667
> password = @@@@@@
> 
> [28989]
> NORTH = @@@@@,transmit
> SOUTH = @@@@@,master,transmit
> 
> (@ being my passwords)
> 
> 
> Do I need to change anything in the rpt.conf file? I read something
> about 1 line needing modified?
> 
> 
> Also, I am on a LAN and the server has a static IP, can I simply enter
> the IP in the FQDN field on the RTCM or must it be a FQDN that
> resolves?
> 
> I tried both, and Ithink I'm doing everything right, but I can't get
> the darn box to connect to my server...
> 
> After I get this connected it's time to break out the soldering iron
> and hook this all up to my 2 repeaters for my simulcast project... fun
> fun!
> 
> Any hints/tips?
> 
> 
> TIA
> 
> Chris N3FYI
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.