[App_rpt-users] App_rpt-users Digest, Vol 65, Issue 2

Tue Jul 1 16:46:39 UTC 2014

tried to download XIPAR   showing  site is down?

On Tue, Jul 1, 2014 at 11:00 AM, <app_rpt-users-request at ohnosec.org> wrote:

> Send App_rpt-users mailing list submissions to
>         app_rpt-users at ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
>         app_rpt-users-request at ohnosec.org
>
> You can reach the person managing the list at
>         app_rpt-users-owner at ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
>    1. Re: QUESTION on making a receive only node (REDBUTTON_CTRL)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 01 Jul 2014 11:17:31 -0400
> From: REDBUTTON_CTRL <jrorke at cogeco.ca>
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] QUESTION on making a receive only node
> Message-ID: <53B2D10B.8060309 at cogeco.ca>
> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
>
> If you can get discriminator audio out of your radio then you should be
> able to use that on an unmodified dongle. That way you can have the RX
> node do the tone decoding and squelch.
>
> Not familiar with the Yaesu 2600 but if it has a packet connector you
> should find discriminator audio there. Might have to put theradio in
> 9600 baud mode to getthe right stuff on the connector. If not then you
> might want to look at at some other radios where you can get
> discriminator audio out.
>
> Jon VA3RQ
>
> On 6/30/2014 12:42 AM, Jim W7RY wrote:
> > Agreed 100%!!
> > 73
> > Jim W7RY
> > *From:* George Csahanin <mailto:george at dyb.com>
> > *Sent:* Sunday, June 29, 2014 9:23 PM
> > *To:* Tim Sawyer <mailto:tim.sawyer at mac.com> ; Bradley Haney
> > <mailto:hammin75 at gmail.com>
> > *Cc:* app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
> > *Subject:* Re: [App_rpt-users] QUESTION on making a receive only node
> > Not just level but speaker audio (should) has filtered audio and PL
> > won't be there...speaker audio = bad audio.(Editorial comment: this is
> > one way Echolink gets to sound Soooooooo bad)
> > George J Csahanin
> > W2DB
> > Cedar Park, TX
> > 2360
> > *From:* Tim Sawyer <mailto:tim.sawyer at mac.com>
> > *Sent:* Sunday, June 29, 2014 10:29 PM
> > *To:* Bradley Haney <mailto:hammin75 at gmail.com>
> > *Cc:* app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
> > *Subject:* Re: [App_rpt-users] QUESTION on making a receive only node
> > Nope, the USB dongle MIC input only needs a few hundred millivolts.
> > Speaker is way more that that. What are you intending to sue for the
> > receiver? Perhaps someone on this list will be familiar with your
> > radio and can suggest a better place to get audio.
> > --
> > Tim
> > :wq
> > On Jun 29, 2014, at 8:12 PM, Bradley Haney <hammin75 at gmail.com
> > <mailto:hammin75 at gmail.com>> wrote:
> >
> >> Hello all we would like to  extend our repeater  receive area by
> >> putting in a receive site  but with a different PL tone .  we have an
> >> area that we lose HT coverage but  can hear it fine from the main tx
> >> of the repeater site. .  Could i just buy a USB FOB CM108  and not
> >> mod it  and just plug in the speaker from the radio into the Mic of
> >> the  dongle?
> >> Thanks for your help
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >> To unsubscribe from this list please visit
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> >> down to the bottom of the page. Enter your email address and press
> >> the "Unsubscribe or edit options button"
> >> You do not need a password to unsubscribe, you can do it via email
> >> confirmation. If you have trouble unsubscribing, please send a
> >> message to the list detailing the problem.
> >
> > ------------------------------------------------------------------------
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> > down to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message
> > to the list detailing the problem.
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20140701/bdb14a3e/attachment-0001.html
> >
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> End of App_rpt-users Digest, Vol 65, Issue 2
> ********************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140701/db3c9542/attachment.html>