[App_rpt-users] QUESTION on making a receive only node

[REDBUTTON_CTRL]

If you can get discriminator audio out of your radio then you should be 
able to use that on an unmodified dongle. That way you can have the RX 
node do the tone decoding and squelch.

Not familiar with the Yaesu 2600 but if it has a packet connector you 
should find discriminator audio there. Might have to put theradio in 
9600 baud mode to getthe right stuff on the connector. If not then you 
might want to look at at some other radios where you can get 
discriminator audio out.

Jon VA3RQ

On 6/30/2014 12:42 AM, Jim W7RY wrote:
> Agreed 100%!!
> 73
> Jim W7RY
> *From:* George Csahanin <mailto:george at dyb.com>
> *Sent:* Sunday, June 29, 2014 9:23 PM
> *To:* Tim Sawyer <mailto:tim.sawyer at mac.com> ; Bradley Haney 
> <mailto:hammin75 at gmail.com>
> *Cc:* app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
> *Subject:* Re: [App_rpt-users] QUESTION on making a receive only node
> Not just level but speaker audio (should) has filtered audio and PL 
> won't be there...speaker audio = bad audio.(Editorial comment: this is 
> one way Echolink gets to sound Soooooooo bad)
> George J Csahanin
> W2DB
> Cedar Park, TX
> 2360
> *From:* Tim Sawyer <mailto:tim.sawyer at mac.com>
> *Sent:* Sunday, June 29, 2014 10:29 PM
> *To:* Bradley Haney <mailto:hammin75 at gmail.com>
> *Cc:* app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
> *Subject:* Re: [App_rpt-users] QUESTION on making a receive only node
> Nope, the USB dongle MIC input only needs a few hundred millivolts. 
> Speaker is way more that that. What are you intending to sue for the 
> receiver? Perhaps someone on this list will be familiar with your 
> radio and can suggest a better place to get audio.
> --
> Tim
> :wq
> On Jun 29, 2014, at 8:12 PM, Bradley Haney <hammin75 at gmail.com 
> <mailto:hammin75 at gmail.com>> wrote:
>
>> Hello all we would like to  extend our repeater  receive area by 
>> putting in a receive site  but with a different PL tone .  we have an 
>> area that we lose HT coverage but  can hear it fine from the main tx 
>> of the repeater site. .  Could i just buy a USB FOB CM108  and not 
>> mod it  and just plug in the speaker from the radio into the Mic of 
>> the  dongle?
>> Thanks for your help
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>> down to the bottom of the page. Enter your email address and press 
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem. 
>
> ------------------------------------------------------------------------
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140701/bdb14a3e/attachment.html>