[App_rpt-users] parameters in usbradio_tune file

[Ken]

This numbers start out as 0.5 each and are adjusted based on the calibration
routine.

 

I imagine they are used to scale the audio level at 1 kHz and the CTCSS
frequency relative to the reading from the whole passband that you get when
"radio tune rxnoise" is run.

 

My imagining seems to be confirmed here

 

http://www.xelatec.com/xipar/node/180

 

73

Ken

 

 

From: Tim Sawyer [mailto:tim.sawyer at mac.com] 
Sent: Wednesday, July 02, 2014 2:43 PM
To: Bob Roszkowski
Cc: app_rpt mailing list
Subject: Re: [App_rpt-users] parameters in usbradio_tune file

 

See if this helps http://ohnosec.org/drupal/node/48

 

--
Tim
:wq

 

On Jul 2, 2014, at 11:28 AM, Bob Roszkowski <bob at w5evh.org> wrote:





Can someone explain what the parameters rxvoiceadj and rxctcssadj do in
usbradio_tune_XXXXX.conf file?  Can't seem to find the documentation on it.

 

thanks






Sincerely,

boB - W5EVH

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem. 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140702/1cb12e0b/attachment.html>