[App_rpt-users] Changing courtesy tones

[Corey Dean]

Normally I just do a rpt reload and it works right away...

Corey N3FE

> On Jul 4, 2014, at 4:12 PM, Michael Hebert <mhebert1975 at gmail.com> wrote:
> 
> Did you try astres.sh
> 
> 
>> On Fri, Jul 4, 2014 at 3:01 PM, Mark Johnston <markjohnston73 at gmail.com> wrote:
>> Happy 4th to everyone,
>> 
>> Trying to figure out where I am going wrong in changing the courtesy tone(s) specifically the linked tone i.e. when other users unkey on the remote nodes...
>> 
>> I thought this was as simple as changing ct8=.... and 
>> run asterisk -rx "module reload" 
>> and even rebooted, did not change the tone at all - and what is the best way to reload these settings?
>> 
>> 
>> [28344]                                 ; Change this to your assigned node number
>> rxchannel=voter/28344
>> duplex=2 ; was 0 and was 3
>> ;erxgain=-3
>> ;etxgain=3
>> ;controlstates=controlstates
>> scheduler=schedule28344
>> morse=morse28344
>> macro=macro28344
>> functions=functions28344
>> phone_functions=functions28344
>> link_functions=functions28344
>> telemetry=telemetry28344
>> wait_times=wait-times
>> context =  radio
>> callerid = "Repeater" <0000000000>
>> idrecording = |iKC7DMF
>> accountcode=RADIO
>> hangtime=100
>> althangtime=100
>> totime=530000
>> idtime=540000
>> politeid=3000
>> 
>> idtalkover=|iKC7DMF
>> unlinkedct=ct2
>> remotect=ct3
>> linkunkeyct=ct8
>> nolocallinkct=1
>> ;eannmode=1
>> ;connpgm=yourconnectprogram
>> ;discpgm=yourdisconnectprogram
>> ;lnkactenable=0
>> ;lnkacttime=1800
>> ;lnkactmacro=*52
>> ;lnkacttimerwarn=30seconds
>> ;remote_inact_timeout=1800
>> ;remote_timeout=3600
>> nounkeyct=0
>> ;holdofftelem=0
>> beaconing=0
>> linktolink=yes
>> telemdefault=2
>> propagate_dtmf = yes
>> propagate_phonedtmf = yes
>> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream.xml
>> 
>> ;
>> ; *** Status Reporting ***
>> ;
>> ; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org
>> ; depending on whether you are running ACID or Limey Linux.
>> 
>> ; ** For ACID ***
>> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
>> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
>> 
>> [schedule28344]
>> ;dtmf_function =  m h dom mon dow  ; ala cron, star is implied
>> 
>> [functions28344]
>> 1=ilink,1
>> 2=ilink,2
>> 3=ilink,3
>> 4=ilink,4
>> 5=macro,1
>> 70=ilink,5
>> 71=ilink,6
>> 72=ilink,7
>> 73=ilink,15
>> 74=ilink,16
>> 75=ilink,8
>> 76=ilink,12                           ; Permanently connect specified link -- monitor only
>> 77=ilink,13                           ; Permanently connect specified link -- transceive
>> 
>> 80=status,1
>> 81=status,2
>> 90=cmd,/home/irlp/scripts/WX/ZIPCODE/Forecast
>> 
>> A=autopatchup,noct=1,farenddisconnect=1,dialtime=20000  ; Autopatch up
>> D=autopatchdn           ; Autopatch down
>> 
>> [telemetry28344]
>> ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
>> ct2=|t(1800,100,120,3000)(1300,100,120,3000)(1750,100,120,3000)(1000,100,120,3000); Star Trek
>> ct3=|t(440,0,150,4096)
>> ct4=|t(550,0,150,2048)
>> ct5=|t(660,0,150,2048)
>> ct6=|t(880,0,150,2048)
>> ct7=|t(660,440,150,2048)
>> ct8=|t(1800,100,120,3000)(1300,100,120,3000)(1750,100,120,3000)(1000,100,120,3000); Star Trek
>> ct9=|t(1800,100,120,3000)(1300,100,120,3000)(1750,100,120,3000)(1000,100,120,3000); Star Trek
>> remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
>> remotemon=|t(1209,0,50,2048)
>> cmdmode=|t(900,903,200,2048)
>> functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
>> patchup=rpt/callproceeding
>> patchdown=rpt/callterminated
>> ;telemdefault=0
>> phonelinkdefault=0
>> 
>> 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140704/cd80c15c/attachment.html>