[App_rpt-users] Changing courtesy tones

[Steve Agee]

 From the CLI run ....
CLI> rpt reload
and maybe the line you actually meant to edit / change is:
remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000)

N5ZUA

On 7/4/2014 3:01 PM, Mark Johnston wrote:
> Happy 4th to everyone,
>
> Trying to figure out where I am going wrong in changing the courtesy 
> tone(s) specifically the linked tone i.e. when other users unkey on 
> the remote nodes...
>
> I thought this was as simple as changing ct8=.... and
> run asterisk -rx "module reload"
> and even rebooted, did not change the tone at all - and what is the 
> best way to reload these settings?
>
>
> [28344]                                 ; Change this to your assigned 
> node number
> rxchannel=voter/28344
> duplex=2 ; was 0 and was 3
> ;erxgain=-3
> ;etxgain=3
> ;controlstates=controlstates
> scheduler=schedule28344
> morse=morse28344
> macro=macro28344
> functions=functions28344
> phone_functions=functions28344
> link_functions=functions28344
> telemetry=telemetry28344
> wait_times=wait-times
> context =  radio
> callerid = "Repeater" <0000000000>
> idrecording = |iKC7DMF
> accountcode=RADIO
> hangtime=100
> althangtime=100
> totime=530000
> idtime=540000
> politeid=3000
>
> idtalkover=|iKC7DMF
> unlinkedct=ct2
> remotect=ct3
> linkunkeyct=ct8
> nolocallinkct=1
> ;eannmode=1
> ;connpgm=yourconnectprogram
> ;discpgm=yourdisconnectprogram
> ;lnkactenable=0
> ;lnkacttime=1800
> ;lnkactmacro=*52
> ;lnkacttimerwarn=30seconds
> ;remote_inact_timeout=1800
> ;remote_timeout=3600
> nounkeyct=0
> ;holdofftelem=0
> beaconing=0
> linktolink=yes
> telemdefault=2
> propagate_dtmf = yes
> propagate_phonedtmf = yes
> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 
> --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream.xml
>
> ;
> ; *** Status Reporting ***
> ;
> ; Uncomment the either group following two statpost lines to report 
> the status of your node to stats.allstarlink.org 
> <http://stats.allstarlink.org>
> ; depending on whether you are running ACID or Limey Linux.
>
> ; ** For ACID ***
> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
>
> [schedule28344]
> ;dtmf_function =  m h dom mon dow  ; ala cron, star is implied
>
> [functions28344]
> 1=ilink,1
> 2=ilink,2
> 3=ilink,3
> 4=ilink,4
> 5=macro,1
> 70=ilink,5
> 71=ilink,6
> 72=ilink,7
> 73=ilink,15
> 74=ilink,16
> 75=ilink,8
> 76=ilink,12                           ; Permanently connect specified 
> link -- monitor only
> 77=ilink,13                           ; Permanently connect specified 
> link -- transceive
>
> 80=status,1
> 81=status,2
> 90=cmd,/home/irlp/scripts/WX/ZIPCODE/Forecast
>
> A=autopatchup,noct=1,farenddisconnect=1,dialtime=20000  ; Autopatch up
> D=autopatchdn           ; Autopatch down
>
> [telemetry28344]
> ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
> ct2=|t(1800,100,120,3000)(1300,100,120,3000)(1750,100,120,3000)(1000,100,120,3000); 
> Star Trek
> ct3=|t(440,0,150,4096)
> ct4=|t(550,0,150,2048)
> ct5=|t(660,0,150,2048)
> ct6=|t(880,0,150,2048)
> ct7=|t(660,440,150,2048)
> ct8=|t(1800,100,120,3000)(1300,100,120,3000)(1750,100,120,3000)(1000,100,120,3000); 
> Star Trek
> ct9=|t(1800,100,120,3000)(1300,100,120,3000)(1750,100,120,3000)(1000,100,120,3000); 
> Star Trek
> remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
> remotemon=|t(1209,0,50,2048)
> cmdmode=|t(900,903,200,2048)
> functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
> patchup=rpt/callproceeding
> patchdown=rpt/callterminated
> ;telemdefault=0
> phonelinkdefault=0
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140704/7abb5bc7/attachment.html>