[App_rpt-users] Solving Identification Problems with direct RF links

[Jon Rorke]

Actually you will hear telemetry if you have the telemetry set to on. So 
you will hear connect disconnect messages.
Jon RQ
On 7/7/2014 11:39 AM, Skyler Fennell wrote:
> Thanks mike, the only problem with this is I can't hear telemetry so I 
> don't know if I actually connected to a node because the telemetry 
> would be silent correct? Is there any way to have conformation that I 
> connected to a node so I don't have to just "hope" that I connected to 
> the node?
>
>
> On Jul 5, 2014, at 11:39 PM, <mike at midnighteng.com 
> <mailto:mike at midnighteng.com>> wrote:
>
>>
>> Skyler,
>>
>> If I understand your problem correctly...
>>
>> Do the same as the repeater...  tx pl to the input of the repeater 
>> only on valid input of your node.
>>
>> Your node might do a final (at rest) id but without pl from valid 
>> input to node, it will not be captured by the rf repeater input.
>>
>> ...mike/kb8jnm
>>
>>
>>         On 7/3/2014 10:50 AM, Skyler F wrote:
>>>         I know this is a major problem that has showed up, and I
>>>         would like to know if anybody knows how to fix it for the
>>>         best operation.
>>>
>>>         Thanks for any help, I am a newbie at the software and
>>>         CentOS ACID is the first time I have used command line.
>>>
>>>         Background
>>>         -There is a remote repeater on a mountain west of me
>>>         -No internet exists at the site
>>>         -I can't add any other link in because of antenna expenses
>>>         -The Rocky Mountain Radio League has held approval for an RF
>>>         link to the repeater using the input frequency of the repeater
>>>
>>>         What they will do
>>>         -Because of the loonngg hang time, they will disable the TX
>>>         CTCSS right away after the transmission is done.
>>>         -They will NOT TX CTCSS on their CW ID so I don't have to
>>>         hear that in the node.
>>>
>>>         What I am expected to do
>>>         -Only CW ID when a remote person is transmitting, so when
>>>         they are coming in from the internet to my node, only ID
>>>         over their transmission (yes I know the morse will be
>>>         playing at the same time as the talking)
>>>         -NO random ID's coming up 10 mins after the conversation is
>>>         done. I don't want my node to just come up at random times
>>>         and ID
>>>
>>>         Any suggestions, any previous attempts for a link like that?
>>>
>>>         Thanks so much, and any help would be greatly appreciated.
>>>         The RMRL wants to start getting this along so I would really
>>>         like some help.
>>>
>>>         73's
>>>
>>>         Skyler KDØWHB
>>>
>>>         -- 
>>>         Skyler Fennell
>>>         amsatnet.info <http://amsatnet.info>
>>>         KDØWHB
>>>         electricity440 at gmail.com <mailto:electricity440 at gmail.com>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>> down to the bottom of the page. Enter your email address and press 
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140707/f6abaee2/attachment.html>