[App_rpt-users] Solving Identification Problems with direct RF links

[Skyler F]

Duplex=0 seems to work great for my setup! I posted it in a different
question but now I am trying to figure out the telemetry problem. I want to
only hear the voice if I am dialing out, not if someone is coming in.

73


On Mon, Jul 7, 2014 at 10:40 AM, Jon Rorke <jrorke at cogeco.ca> wrote:

>  Actually you will hear telemetry if you have the telemetry set to on. So
> you will hear connect disconnect messages.
> Jon RQ
>
> On 7/7/2014 11:39 AM, Skyler Fennell wrote:
>
> Thanks mike, the only problem with this is I can't hear telemetry so I
> don't know if I actually connected to a node because the telemetry would be
> silent correct? Is there any way to have conformation that I connected to a
> node so I don't have to just "hope" that I connected to the node?
>
>
> On Jul 5, 2014, at 11:39 PM, <mike at midnighteng.com> wrote:
>
>
>  Skyler,
>
>  If I understand your problem correctly...
>
>  Do the same as the repeater...  tx pl to the input of the repeater only
> on valid input of your node.
>
>  Your node might do a final (at rest) id but without pl from valid input
> to node, it will not be captured by the rf repeater input.
>
>  ...mike/kb8jnm
>
>
>      On 7/3/2014 10:50 AM, Skyler F wrote:
>>
>>         I know this is a major problem that has showed up, and I would
>> like to know if anybody knows how to fix it for the best operation.
>>
>> Thanks for any help, I am a newbie at the software and CentOS ACID is the
>> first time I have used command line.
>>
>>  Background
>>  -There is a remote repeater on a mountain west of me
>>  -No internet exists at the site
>>  -I can't add any other link in because of antenna expenses
>>  -The Rocky Mountain Radio League has held approval for an RF link to the
>> repeater using the input frequency of the repeater
>>
>>  What they will do
>>  -Because of the loonngg hang time, they will disable the TX CTCSS right
>> away after the transmission is done.
>>  -They will NOT TX CTCSS on their CW ID so I don't have to hear that in
>> the node.
>>
>>  What I am expected to do
>>  -Only CW ID when a remote person is transmitting, so when they are
>> coming in from the internet to my node, only ID over their transmission
>> (yes I know the morse will be playing at the same time as the talking)
>>  -NO random ID's coming up 10 mins after the conversation is done. I
>> don't want my node to just come up at random times and ID
>>
>>  Any suggestions, any previous attempts for a link like that?
>>
>>  Thanks so much, and any help would be greatly appreciated. The RMRL
>> wants to start getting this along so I would really like some help.
>>
>>  73's
>>
>>  Skyler KDØWHB
>>
>> --
>> Skyler Fennell
>> amsatnet.info
>> KDØWHB
>> electricity440 at gmail.com
>>
>>      _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140707/304c95ec/attachment.html>