[App_rpt-users] Error 1

Tue Jul 8 01:11:51 UTC 2014

My node has been running fine until now, and it just died with error 1.

Here are my messages

[Jul  7 19:10:08] WARNING[8463] acl.c:  is not a valid IP

[Jul  7 19:10:08] WARNING[8463] app_followme.c: No follow me config file
(followme.conf), so no follow me

[Jul  7 19:10:08] NOTICE[8463] app_queue.c: No call queueing config file
(queues.conf), so no call queues

[Jul  7 19:10:08] WARNING[8463] cdr_csv.c: unable to load config: cdr.conf

[Jul  7 19:10:08] NOTICE[8463] chan_agent.c: No agent configuration found
-- agent support disabled

[Jul  7 19:10:08] NOTICE[8463] pbx_ael.c: Starting AEL load process.

[Jul  7 19:10:08] NOTICE[8463] pbx_ael.c: AEL load process: calculated
config file name '/etc/asterisk/extensions.ael'.

[Jul  7 19:10:08] NOTICE[8463] pbx_ael.c: File /etc/asterisk/extensions.ael
not found; AEL declining load

[Jul  7 19:10:08] NOTICE[8488] app_rpt.c: Normal Repeater Init  40764

[Jul  7 19:10:08] WARNING[8493] chan_usbradio.c: Loaded parameters from
usbradio_tune_usb40764.conf for device usb40764 .

73

KDØWHB

On Wed, Jul 2, 2014 at 12:48 PM, Bob <kk6ecm at gmail.com> wrote:

>  Yes. I’m using
>
>
>
> ...
>
> power=5
>
> height=1
>
> gain=3
>
> dir=0
>
> server1=server1.echolink.org
>
> server2=servers.echolink.org
>
> server3=nawest.echolink.org
>
> server4=backup.echolink.org
>
>
>
> #includeifexists custom/echolink.conf
>
>
>
>
>
> It may only use the first three... don’t know.
>
>
>  ------------------------------
>
> *From:* Skyler Fennell [mailto:electricity440 at gmail.com]
> *Sent:* Wednesday, July 02, 2014 11:33 AM
> *To:* Bob; app_rpt-users at ohnosec.org
>
> *Subject:* Re: [App_rpt-users] Error 1
>
>
>
> Do I select the server on the echolink conf file?
>
>
> On Jul 2, 2014, at 8:47 AM, "Bob" <kk6ecm at gmail.com> wrote:
>
>  I’ve had trouble with server2 for echolink. Recommend deleting and
> select another from the list.
>
>
>
> Bob
>
> kk6ecm
>
>
>  ------------------------------
>
> *From:* app_rpt-users-bounces at ohnosec.org [
> mailto:app_rpt-users-bounces at ohnosec.org
> <app_rpt-users-bounces at ohnosec.org>] *On Behalf Of *Skyler F
> *Sent:* Wednesday, July 02, 2014 7:29 AM
> *To:* app_rpt-users at ohnosec.org
> *Subject:* Re: [App_rpt-users] Error 1
>
>
>
> I guess it didn't remember the stuff from yesterday, this is all it had
> today
>
> [Jul  2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init  40764
> [Jul  2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init  40930
> [Jul  2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
>
>
>
>
>
> On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm at gmail.com> wrote:
>
> For sure Asterisk is not happy. A shot... sounds like the computer lost
> your URI/FOB USB address when it lost power. Need to reset using lsusb to
> identify address and reset devstr= parameters in the USB tune file. I’ve
> also had this problem when the network settings are not correct, but would
> bet on the devstr perameters.
>
>
>
> Bob
>
> kk6ecm
>
>
>  ------------------------------
>
> *From:* app_rpt-users-bounces at ohnosec.org [mailto:
> app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Skyler F
> *Sent:* Tuesday, July 01, 2014 4:15 PM
> *To:* app_rpt-users at ohnosec.org
> *Subject:* [App_rpt-users] Error 1
>
>
>
> I know it is probably on the archive a lot of places, but I am
> experiencing Error 1 sometimes.
>
>
>
> It is sometimes right off the bat when I reboot the system, sometimes not.
> I had it before, and I decided to reinstall from scratch.
>
>
>
> Is there anything i can do about this? The only thing I could think that
> may have led to this is the power cord accidentally coming loose once when
> the computer was on.
>
>
>
>
>
> Asteriscks died with error code 1
>
>
>
> Automatically restarting
>
>
>
> Asteriscks died with error code 1
>
>
>
> Automatically restarting
>
>
>
> Asteriscks died with error code 1
>
>
>
> Automatically restarting
>
>
>
>
>
>
>
> ETC........................
>
>
>
>
>
> Thnks for any help.
>
>
>
> Skyler Fennell
>
> amsatnet.info
>
> KDØWHB
>
> electricity440 at gmail.com
>
>
>
>
> --
>
> Skyler Fennell
>
> amsatnet.info
>
> KDØWHB
>
> electricity440 at gmail.com
>
>

-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140707/2eeac3cf/attachment.html>