[App_rpt-users] Error 1

Tue Jul 8 13:08:05 UTC 2014

I rebooted it and it worked again, I just don't want that happening when my
system is permanent and running, it would get annoying having to ssh and
reboot (at least restart asterisks) every time that happens, especially if
I have to SSH remotely while I am gone.

On Mon, Jul 7, 2014 at 8:34 PM, Bob <kk6ecm at gmail.com> wrote:

>  Looks like it is online now, running just fine.
>
>
>  ------------------------------
>
> *From:* Skyler F [mailto:electricity440 at gmail.com]
> *Sent:* Monday, July 07, 2014 6:12 PM
>
> *To:* Bob; app_rpt-users at ohnosec.org
> *Subject:* Re: [App_rpt-users] Error 1
>
>
>
> My node has been running fine until now, and it just died with error 1.
>
>
>
> Here are my messages
>
>
>
> [Jul  7 19:10:08] WARNING[8463] acl.c:  is not a valid IP
>
> [Jul  7 19:10:08] WARNING[8463] app_followme.c: No follow me config file
> (followme.conf), so no follow me
>
> [Jul  7 19:10:08] NOTICE[8463] app_queue.c: No call queueing config file
> (queues.conf), so no call queues
>
> [Jul  7 19:10:08] WARNING[8463] cdr_csv.c: unable to load config: cdr.conf
>
> [Jul  7 19:10:08] NOTICE[8463] chan_agent.c: No agent configuration found
> -- agent support disabled
>
> [Jul  7 19:10:08] NOTICE[8463] pbx_ael.c: Starting AEL load process.
>
> [Jul  7 19:10:08] NOTICE[8463] pbx_ael.c: AEL load process: calculated
> config file name '/etc/asterisk/extensions.ael'.
>
> [Jul  7 19:10:08] NOTICE[8463] pbx_ael.c: File
> /etc/asterisk/extensions.ael not found; AEL declining load
>
> [Jul  7 19:10:08] NOTICE[8488] app_rpt.c: Normal Repeater Init  40764
>
> [Jul  7 19:10:08] WARNING[8493] chan_usbradio.c: Loaded parameters from
> usbradio_tune_usb40764.conf for device usb40764 .
>
> 73
>
> KDØWHB
>
>
>
> On Wed, Jul 2, 2014 at 12:48 PM, Bob <kk6ecm at gmail.com> wrote:
>
> Yes. I’m using
>
>
>
> ...
>
> power=5
>
> height=1
>
> gain=3
>
> dir=0
>
> server1=server1.echolink.org
>
> server2=servers.echolink.org
>
> server3=nawest.echolink.org
>
> server4=backup.echolink.org
>
>
>
> #includeifexists custom/echolink.conf
>
>
>
>
>
> It may only use the first three... don’t know.
>
>
>  ------------------------------
>
> *From:* Skyler Fennell [mailto:electricity440 at gmail.com]
> *Sent:* Wednesday, July 02, 2014 11:33 AM
> *To:* Bob; app_rpt-users at ohnosec.org
>
>
> *Subject:* Re: [App_rpt-users] Error 1
>
>
>
> Do I select the server on the echolink conf file?
>
>
> On Jul 2, 2014, at 8:47 AM, "Bob" <kk6ecm at gmail.com> wrote:
>
>  I’ve had trouble with server2 for echolink. Recommend deleting and
> select another from the list.
>
>
>
> Bob
>
> kk6ecm
>
>
>  ------------------------------
>
> *From:* app_rpt-users-bounces at ohnosec.org [
> mailto:app_rpt-users-bounces at ohnosec.org
> <app_rpt-users-bounces at ohnosec.org>] *On Behalf Of *Skyler F
> *Sent:* Wednesday, July 02, 2014 7:29 AM
> *To:* app_rpt-users at ohnosec.org
> *Subject:* Re: [App_rpt-users] Error 1
>
>
>
> I guess it didn't remember the stuff from yesterday, this is all it had
> today
>
> [Jul  2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init  40764
> [Jul  2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init  40930
> [Jul  2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
> [Jul  2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect
> to the Echolink server server2.echolink.org
>
>
>
>
> On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm at gmail.com> wrote:
>
> For sure Asterisk is not happy. A shot... sounds like the computer lost
> your URI/FOB USB address when it lost power. Need to reset using lsusb to
> identify address and reset devstr= parameters in the USB tune file. I’ve
> also had this problem when the network settings are not correct, but would
> bet on the devstr perameters.
>
>
>
> Bob
>
> kk6ecm
>
>
>  ------------------------------
>
> *From:* app_rpt-users-bounces at ohnosec.org [mailto:
> app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Skyler F
> *Sent:* Tuesday, July 01, 2014 4:15 PM
> *To:* app_rpt-users at ohnosec.org
> *Subject:* [App_rpt-users] Error 1
>
>
>
> I know it is probably on the archive a lot of places, but I am
> experiencing Error 1 sometimes.
>
>
>
> It is sometimes right off the bat when I reboot the system, sometimes not.
> I had it before, and I decided to reinstall from scratch.
>
>
>
> Is there anything i can do about this? The only thing I could think that
> may have led to this is the power cord accidentally coming loose once when
> the computer was on.
>
>
>
>
>
> Asteriscks died with error code 1
>
>
>
> Automatically restarting
>
>
>
> Asteriscks died with error code 1
>
>
>
> Automatically restarting
>
>
>
> Asteriscks died with error code 1
>
>
>
> Automatically restarting
>
>
>
>
>
>
>
> ETC........................
>
>
>
>
>
> Thnks for any help.
>
>
>
> Skyler Fennell
>
> amsatnet.info
>
> KDØWHB
>
> electricity440 at gmail.com
>
>
>
>
> --
>
> Skyler Fennell
>
> amsatnet.info
>
> KDØWHB
>
> electricity440 at gmail.com
>
>
>
>
>
> --
>
> Skyler Fennell
>
> amsatnet.info
>
> KDØWHB
>
> electricity440 at gmail.com
>

-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140708/3e3ba77e/attachment.html>