[App_rpt-users] Macro Help

[Skyler F]

This goes back to what I was dealing with before, my link to the remote
repeater (via input frequency) requires me to use duplex=0 so I don't have
to deal with it ID'ing over the repeater etc.

If I were to use duplex=1, there would be 3 constraints I would need to
solve

#1- NO voice prompt comes in when I enable or disable TX PL on Input ONLY ,
I can't have it saying "T" "X" "P" "L" "E" "N" "A" every time I have a dtmf
or macro enabling and disabling it.

#2- After I unkey, it does this  [Wait , Courtesy beep , Wait] , I don't
know what the first wait is, I know the second one is hang time. I need to
delete both waits.

#3- I think pretty easy I saw some other threads on it, run macros when
connected to any node, and run a macros when disconnected.

If those three constraints are solved, I can then turn duplex=0 to 1. Else,
I have to stay there.


73 Skyler KDØWHB

On Tue, Jul 8, 2014 at 8:11 AM, Doug Crompton <doug at crompton.com> wrote:

> set duplex=1  in rpt.conf
>
>
>
>
> *73 DougWA3DSP http://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Tue, 8 Jul 2014 06:58:27 -0600
> Subject: Re: [App_rpt-users] Macro Help
> From: electricity440 at gmail.com
> To: doug at crompton.com
>
>
> I just realized that no audio will play when Duplex=0. Telemetry works,
> but any system audio does not work. Is there a way to fix this?
>
>
> On Mon, Jul 7, 2014 at 10:43 PM, Doug Crompton <doug at crompton.com> wrote:
>
> First of all there is a way to do that automatically. Put a sound file in
>
> /var/lib/asterisk/sounds/rpt/nodenames/
>
> such as   27225.ulaw
>
> That file would play when you connected to node 27225.
>
> There are already some sample files in there and some groups like the WAN
> system have file sets you can install for many of their nodes.
>
> To just play a sound file locally when you type a DTMF sequence do the
> following....
>
> In the functions section of your rpt.conf file add the DTMF sequence. Note
> the DTMF sequence must not conflict with any other commands.
>
> 985=localplay,/tmp/some-sound-file
>
> This would play the file when you DTMF 985. Note that you do NOT put the
> extent on the sound file name. No ulaw, gsm etc.  and the file must comply
> with the requirements for playing - sample rate, etc.
>
> Another way to execute macro commands and a way I usually employ because
> it is much more flexible is to use bash scripts in the system and call
> them to do things. The scripts could also be called from a system cron
> job setup using crontab.
>
> 985=cmd,/tmp/some-script.sh
>
> The script could be
>
> #! /bin/bash
> /usr/sbin/asterisk -rx "rpt fun node *327133"
> /usr/sbin/asterisk -rx "rpt localplay node some-sound-file"
>
> Replace node with your node number
>
> This would connect your node to node 27133 and play the specified sound
> file locally.
>
> These scripts could go anywhere on the system but I recommend creating a
> directory under /etc/asterisk - call it local or your call letters or
> whatever you want and put your local files there. Then if you backup the
> asterisk directory your local files will be backed up also.
>
> Remember you have to make a script you create executable for it to work -
> chmod 750 filename
>
>
>
> *73 DougWA3DSP http://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Mon, 7 Jul 2014 16:14:58 -0600
> From: electricity440 at gmail.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Macro Help
>
>
> Im still a bit confused on how to use macros. So lets say I want to
> execute a command when the DTMF is dialed, lets say just a simple localplay
>
> How would I implement that command into a DTMF sequence so I could save it
> as part of my macro.
>
> Lets say I wanted to create a macro to connect to the node 28298 and play
> the audio file. How would I implement the localplay command in the macros?
>
> [mymacros]
>
> 1= (localplaycommandHere) *328298
>
>
> 73
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
>
>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
>



-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140708/d141b87c/attachment.html>