[App_rpt-users] Transmit Sequence of tones when all stations are disconnected

[Skyler Fennell]

Could I please have some example code. I talked for an hour and a half to someone really good at allstar but they still have no idea on how to run a macro or script etc (to eventually dial DTMF) . Only when ALLL stations disconnect. I can not have the command dialed every time a station disconnects because of the fact that a station might be still connected when another one disconnects. 

I would really, really appreciate any bit of help, myself, I suck at working with the AllStar command line. Some example code would be very helpful.

This is very important for the repeater I am linking too. I need to Dial DTMF commands when Connected and when No link connections exist. Not when someone disconnects but there is still a connection.

73 
Thanks for any help

Skyler / KDØWHB 

On Jul 16, 2014, at 8:40 PM, <mike at midnighteng.com> wrote:

> 
> Skyler,
> 
> You need to use the EVENT handler for your event to trigger/call a MACRO when condition is true/valid and execute your desired tone seq.
> 
> It is a pretty strait forward few lines of code.
> 
> Both items are described on the drupal site.
> 
> ...mike/kb8jnm
> 
> 
> -------- Original Message --------
> Subject: [App_rpt-users] Transmit Sequence of tones when all stations
> are disconnected
> From: Skyler F <electricity440 at gmail.com>
> Date: Wed, July 16, 2014 10:31 pm
> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> 
> Hi, 
> 
> I posted it a while back, I just want to know if it is possible, because I am really in need of this for my node.
> 
> 
> I really need to transmit a sequence of DTMF tones when a link disconnects, but ONLY when all links disconnect. 
> 
> So if two links are connected, and one link disconnects, there will be still one node to the server, thus it shall not transmit any tones. When the second node disconnects, there will be Zero nodes left, therefore, it will need to transmit the sequence. 
> 
> Any ideas?
> 
> 73 everybody, and thanks for any efforts or help for a solution to this. 
> 
> Skyler KDØWHB 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140725/2e8c7aad/attachment.html>