[App_rpt-users] Command to Disable/Enable ID

[Kenneth Grimard]

yes it will have to restart that may be a problem.
some things can not be changed until you ether reload you rpt config or 
restart asterisk.

ken n1dot



On 7/28/2014 3:38 PM, Skyler Fennell wrote:
> Will asterisk have to restart to change this because I can not have 
> the links disconnect when the change is taken place because the change 
> will take place on link connect.
>
> On Jul 28, 2014, at 9:08 AM, Kenneth Grimard <n1dot1 at gmail.com 
> <mailto:n1dot1 at gmail.com>> wrote:
>
>> hi skyler
>>
>> look at this site he has a lot of very useful script for allstar. 
>> take a good look at the " astflip " script.
>> it will do what you need. it will allow you to change to completely 
>> different copy of rpt.conf.
>>
>> you set a rpt.normal file and a rpt.fipped file then what the script 
>> will do is replace your rpt.conf with
>>  the normal file or the flipped file upon demand via a dtmf command.
>>
>> it use this script to do exactly what you are trying to do twice a 
>> week to feed a repeater system a skywarn net.
>>
>> And when i do that the script change the running config of allstar 
>> for the net and turns off all courtesy tones
>> and other stuff.
>>
>> ken n1dot
>>
>>
>>
>>
>> On 7/28/2014 1:12 PM, Skyler F wrote:
>>> I have a link to a remote repeater using the input frequency.
>>>
>>> We finally figured out how to execute a command when the last link 
>>> disconnects but not when 1 link is still connected while the other 
>>> disconnects.
>>>
>>> In the connect and disconnect script files, we have the DTMF dialing.
>>>
>>> *Is there a command I can use to completely disable the ID without 
>>> disabling any other telemetry or changing anything else so I can put 
>>> that in the script files? *
>>>
>>> The node ONLY needs to ID when it is transmitting, and the ONLY time 
>>> it transmits is when it is connected to a link.
>>>
>>>
>>> you might say "hey, what if you are only connected for 8 mins, not 
>>> 10 and it does not ID" , well I will have it ID on disconnect.
>>>
>>> Thanks, this is the last problem we have to fix, and if not, our 
>>> only other choice is to let the ID loop play every 10 mins.
>>>
>>> Skyler Fennell
>>> amsatnet.info <http://amsatnet.info>
>>> KDØWHB
>>> electricity440 at gmail.com <mailto:electricity440 at gmail.com>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>> down to the bottom of the page. Enter your email address and press 
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140728/ba4709ec/attachment.html>