[App_rpt-users] Command to Disable/Enable ID

[Skyler Fennell]

Will asterisk have to restart to change this because I can not have the links disconnect when the change is taken place because the change will take place on link connect. 

On Jul 28, 2014, at 9:08 AM, Kenneth Grimard <n1dot1 at gmail.com> wrote:

> hi skyler
> 
> look at this site he has a lot of very useful script for allstar. take a good look at the " astflip " script.
> it will do what you need. it will allow you to change to completely different copy of rpt.conf.
> 
> you set a rpt.normal file and a rpt.fipped file then what the script will do is replace your rpt.conf with
>  the normal file or the flipped file upon demand via a dtmf command.
> 
> it use this script to do exactly what you are trying to do twice a week to feed a repeater system a skywarn net.
> 
> And when i do that the script change the running config of allstar for the net and turns off all courtesy tones
> and other stuff.
> 
> ken n1dot
> 
> 
> 
> 
> On 7/28/2014 1:12 PM, Skyler F wrote:
>> I have a link to a remote repeater using the input frequency.
>> 
>> We finally figured out how to execute a command when the last link disconnects but not when 1 link is still connected while the other disconnects. 
>> 
>> In the connect and disconnect script files, we have the DTMF dialing. 
>> 
>> Is there a command I can use to completely disable the ID without disabling any other telemetry or changing anything else so I can put that in the script files? 
>> 
>> The node ONLY needs to ID when it is transmitting, and the ONLY time it transmits is when it is connected to a link. 
>> 
>> 
>> you might say "hey, what if you are only connected for 8 mins, not 10 and it does not ID" , well I will have it ID on disconnect.
>> 
>> Thanks, this is the last problem we have to fix, and if not, our only other choice is to let the ID loop play every 10 mins. 
>>  
>> Skyler Fennell
>> amsatnet.info
>> KDØWHB
>> electricity440 at gmail.com
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140728/b11ea101/attachment.html>