[App_rpt-users] no audio from URI

Tue Jun 3 19:11:43 UTC 2014

So if you do something like 'radio tune txvoice 500', you hear nothing
in the headphones?

Out of curiosity, try connecting the headphones to the onboard audio
in the computer (assuming it has such) and repeat the test....

When I first started playing with ACID in a VirtualBox VM, I seemed to
have no audio out. I then disabled VBox audio for the VM, and it
started working. I didn't spend any more time analysing it, so it may
have started working for some other reason. I've since installed on a
"real" computer, and disabled the onboard audio via BIOS setup there,
and everything is working FB there.

73,

    ~iain / N6ML

On Tue, Jun 3, 2014 at 11:51 AM, torben at klimt-online.com
<torben at klimt-online.com> wrote:
> Now i tried 3 different computers with 2 URI-Boards and 3 installs
>
>
>
> -          SQL detect by DSP -> ok
>
> -          DTMF reading -> ok
>
> -          Transmitting by PTT -> ok
>
> -          Sending audio -> NO
>
>
>
> I have headphones connectet direct to the URI on Pins 13 (GND) and 22/23 ->
> no nothing L L
>
>
>
> Von: app_rpt-users-bounces at ohnosec.org
> [mailto:app_rpt-users-bounces at ohnosec.org] Im Auftrag von kk6ecm
> Gesendet: Dienstag, 3. Juni 2014 14:11
> An: App_rpt-users at ohnosec.org
> Betreff: Re: [App_rpt-users] no audio from URI
>
>
>
> Again, I'm not sure if it is your issue, but the chipset used in your board
> is of the same family as the one I seemed to have difficulty. When I chose a
> board with an older generation chipset (NM10, and not the 7x series), the
> audio worked good.
>
> Thanks,
>
> Bob
>
> kk6ecm
>
>
>
> Sent from iPad
>
>
>
>
> On Jun 3, 2014, at 4:19 AM, "torben at klimt-online.com"
> <torben at klimt-online.com> wrote:
>
> i take this box
>
>
>
> http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/dc3217iye-product-brief.pdf
>
>
>
> 73 de tom dh6mbt
>
> ________________________________
>
> Von: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org]
> im Auftrag von kk6ecm [kk6ecm at gmail.com]
> Gesendet: Dienstag, 3. Juni 2014 12:59
> An: App_rpt-users at ohnosec.org
> Betreff: Re: [App_rpt-users] no audio from URI
>
> I'm not sure of your issue, but your experience sounds like mine when I
> attempted to use a computer with a newer chipset, incompatible withe CentOS
> 5.10. That was Intel chipset NM 70. When I used a mother board with the
> older Intel chipset NM 10, I hade no audio issues. I discovered the issue
> when using DMK Engineering uridiag software on the ACID build (see URI FAQ
> on the DMK website re uridiag and loopback testing).
>
> Thanks,
>
> Bob
>
> kk6ecm
>
>
>
> Sent from iPad
>
>
>
>
> On Jun 2, 2014, at 11:01 PM, "torben at klimt-online.com"
> <torben at klimt-online.com> wrote:
>
> good morning,
>
> i connect a headphone to the URI so we don`t need to search the problem on
> the Motorolas....
>
>
>
> 73...
>
>
>
> ________________________________
>
> Von: David Morley [ab8tn1 at cox.net]
> Gesendet: Dienstag, 3. Juni 2014 07:14
> An: torben at klimt-online.com
> Betreff: Re: [App_rpt-users] no audio from URI
>
> Are the GM 360s the same as the GM 300s?  Do they have 16 pin connectors
>
> Sent from my iPhone
>
>
>
>
> On Jun 2, 2014, at 2:07 PM, "torben at klimt-online.com"
> <torben at klimt-online.com> wrote:
>
> Hi all,
>
> i think i have a little blackout L
>
> I would like to set up a repeater with 2 GM360
>
> <!--[if !supportLists]-->-          <!--[endif]-->SQL detect is ok
>
> <!--[if !supportLists]-->-          <!--[endif]-->NF to another connectet
> repeater is ok
>
> <!--[if !supportLists]-->-          <!--[endif]-->DTMF is ok (looks good on
> console)
>
> <!--[if !supportLists]-->-          <!--[endif]-->PTT is ok
>
> BUT there is no audio out from the URI on Port 22 and or 23 L
>
> On a windows machine the URI works fine but on the asterisk there is no
> output
>
> Any ideas ?
>
> greetings
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe
> or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe
> or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe
> or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.