[App_rpt-users] Node linking from Linux command prompt

[Scott Weis]

The script can be found at:

 

http://reflector.kb2ear.net/app_rpt_control.tar.gz

 

From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Scott Weis
Sent: Monday, June 09, 2014 11:17 PM
To: 'ronald simpson'; 'App RPT Users'
Subject: Re: [App_rpt-users] Node linking from Linux command prompt

 

Two way I know of are:

 

/usr/sbin/asterisk –rx “rpt fun 2xxxx *3xxxxx”

 

Or I have a PHP script that uses the manager interface to do the same thing major advantage to this is you don’t need root access to run it. If anyone wants the php code I uses let me know and I’ll post it somewhere.

 

73,

Scott KB2EAR

 

From: app_rpt-users-bounces at ohnosec.org <mailto:app_rpt-users-bounces at ohnosec.org>  [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of ronald simpson
Sent: Monday, June 09, 2014 10:34 PM
To: App RPT Users
Subject: [App_rpt-users] Node linking from Linux command prompt

 

Looking to see if anyone knows if it is possible to connect to a node from the Linux command line prompt vs using the Asterisk CLI...

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140609/314c1df9/attachment.html>