[App_rpt-users] Node linking from Linux command prompt

[Doug Crompton]

Ronald,

 Any valid command in the CLI can be given at the Linux prompt. Precede it with

asterisk -rx   "commands"

/usr/sbin/asterisk -rx "rpt fun 27225 *328190"

would connect node 27225 to node 28190

/usr/sbin/asterisk -rx "iax2 show registration"

would show registration.

etc.....
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Mon, 9 Jun 2014 19:34:20 -0700
From: n6gkj1 at gmail.com
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Node linking from Linux command prompt

Looking to see if anyone knows if it is possible to connect to a node from the Linux command line prompt vs using the Asterisk CLI...

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140609/e6ca15a5/attachment.html>