[App_rpt-users] Node linking from Linux command prompt

[ronald simpson]

Thanks guys!!!
On Jun 9, 2014 8:21 PM, "Doug Crompton" <doug at crompton.com> wrote:

> Ronald,
>
>  Any valid command in the CLI can be given at the Linux prompt. Precede it
> with
>
> asterisk -rx   "commands"
>
> /usr/sbin/asterisk -rx "rpt fun 27225 *328190"
>
> would connect node 27225 to node 28190
>
> /usr/sbin/asterisk -rx "iax2 show registration"
>
> would show registration.
>
> etc.....
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Mon, 9 Jun 2014 19:34:20 -0700
> From: n6gkj1 at gmail.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Node linking from Linux command prompt
>
> Looking to see if anyone knows if it is possible to connect to a node from
> the Linux command line prompt vs using the Asterisk CLI...
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140609/58b1d654/attachment.html>