[App_rpt-users] Does anyone have a working circuit diagramfor Baofeng/Kenwood to URIx?

[Kirk Just Kirk]

Do they have discriminator/detector audio?? No they dont! and they also
lack PRE/DE on audio..you get "Speaker Audio" complete with hiss.
They sound and perform like shit...


On Wed, Jun 11, 2014 at 5:22 PM, Jim W7RY <w7ry at centurytel.net> wrote:

>   Baufongs most certainly do have a cor output. They have a busy light
> don’t they?  YES they do!
>
> There are schematics on the internet for the Baofeng portable. You just
> have to dig for it.
>
> 73
> Jim W7RY
>
>
>  *From:* Scott Weis <kb2ear at kb2ear.net>
> *Sent:* Wednesday, June 11, 2014 12:40 PM
> *To:* 'Steven Donegan' <steve at donegan.org> ; ''App RPT Users''
> <app_rpt-users at ohnosec.org>
> *Subject:* Re: [App_rpt-users] Does anyone have a working circuit
> diagramfor Baofeng/Kenwood to URIx?
>
>
> I doubt you will find much help anywhere. Baofeng radios lack COR and
> discriminator output so they would not be suitable for use with allstar.
> The only portable I know of that works is the Kenwood F6 with it
> mic/speaker port set for packet mode. But the duty cycle required for
> allstar or any repeater/remote base is fairly high and portables are not
> suitable for long term use.
>
>
>
> *From:* app_rpt-users-bounces at ohnosec.org [mailto:
> app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Steven Donegan
> *Sent:* Wednesday, June 11, 2014 3:21 PM
> *To:* 'App RPT Users'
> *Subject:* [App_rpt-users] Does anyone have a working circuit diagram for
> Baofeng/Kenwood to URIx?
>
>
>
> I am looking for a circuit diagram so I can fabricate a cable to connect a
> URIx to a Baofeng (or pair of Baofeng's) suitable for use with
> ACID/Allstar. Any assistance would be useful. I have not found anything on
> the web thus far...
>
>
>
> ____________
> Steven Donegan
> KK6IVC
> SSCC/NORC Life Member, Car #86
> www.sscc.us
>
> ------------------------------
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140611/e3525a42/attachment.html>