[App_rpt-users] Server Config is Blank

[Andrew Sylthe]

Hello All,

I am also experiencing this exact same issue.

Here is the error returned after running 'nodesetup.sh' from the command
line:

*Failed to download and unpack configuration filesAllstar Link Portal
Config Download Failed.. exiting*

The nodesetup.sh script has always worked well in the past.  Is this a
server issue?  My node is setup properly in the AllStar Portal.

Thanks!


On Wed, Jun 18, 2014 at 9:30 AM, Thomas Delmonego <delmonego at hotmail.de>
wrote:

> Hi to all,
>
> I have the same problem! Also starting the programm "nodesetup.sh" after
> the failed installation gives the same negative result:
>
> Failed to download and unpack configuration files
> Allstar Link Portal Config Download Failed.. exiting
>
> And when i try to install another registered server, that's the same. In
> the past i configured it without problem. Perhaps there's a problem with
> Allstarlink.org?
>
> 73! Thomas, IW3AMQ
> ------------------------------
> Date: Sun, 25 May 2014 22:18:35 +0100
> From: email at jonbyrne.com
> To: App_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Server Config is Blank
>
>
> Good Evening
>
> I have installed the server and set up and had a node configured on the
> online portal, however when I run "nodesetup.sh" on the server I get past
> the login prompt, confirm the server and then the downloads starts.
>
> However it ends with the error
>
> Failed to download and unpack configuration files
> Allstar Link Portal Config Download Failed.. exiting
>
> I have tried to walk through each line and as far as I can see the file it
> downloads is empty, I have tried to download it manually but the tar is
> empty and has a file sizes of 0 bytes.
>
> Has anyone else had this problem or know how to resolve it?
>
> Thanks
> ------------
> Jon Byrne
> ​2E0RFU
> email at jonbyrne.com
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Andrew Sylthe
KC9ONA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140620/175db492/attachment.html>