[App_rpt-users] Server Config is Blank

[Andrew Sylthe]

*UPDATE*

I just ran 'nodesetup.sh' and it worked!

There were no changes made at my end.  Thanks to anyone that may have fixed
the issue at the AllStar end.


On Fri, Jun 20, 2014 at 11:09 PM, Andrew Sylthe <asylthe at kc9ona.com> wrote:

> Hello All,
>
> I am also experiencing this exact same issue.
>
> Here is the error returned after running 'nodesetup.sh' from the command
> line:
>
> *Failed to download and unpack configuration files Allstar Link Portal
> Config Download Failed.. exiting*
>
> The nodesetup.sh script has always worked well in the past.  Is this a
> server issue?  My node is setup properly in the AllStar Portal.
>
> Thanks!
>
>
> On Wed, Jun 18, 2014 at 9:30 AM, Thomas Delmonego <delmonego at hotmail.de>
> wrote:
>
>> Hi to all,
>>
>> I have the same problem! Also starting the programm "nodesetup.sh" after
>> the failed installation gives the same negative result:
>>
>> Failed to download and unpack configuration files
>> Allstar Link Portal Config Download Failed.. exiting
>>
>> And when i try to install another registered server, that's the same. In
>> the past i configured it without problem. Perhaps there's a problem with
>> Allstarlink.org?
>>
>> 73! Thomas, IW3AMQ
>> ------------------------------
>> Date: Sun, 25 May 2014 22:18:35 +0100
>> From: email at jonbyrne.com
>> To: App_rpt-users at ohnosec.org
>> Subject: [App_rpt-users] Server Config is Blank
>>
>>
>> Good Evening
>>
>> I have installed the server and set up and had a node configured on the
>> online portal, however when I run "nodesetup.sh" on the server I get past
>> the login prompt, confirm the server and then the downloads starts.
>>
>> However it ends with the error
>>
>> Failed to download and unpack configuration files
>> Allstar Link Portal Config Download Failed.. exiting
>>
>> I have tried to walk through each line and as far as I can see the file
>> it downloads is empty, I have tried to download it manually but the tar is
>> empty and has a file sizes of 0 bytes.
>>
>> Has anyone else had this problem or know how to resolve it?
>>
>> Thanks
>> ------------
>> Jon Byrne
>> ​2E0RFU
>> email at jonbyrne.com
>>
>> _______________________________________________ App_rpt-users mailing
>> list App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
>> from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button" You do not need a password to
>> unsubscribe, you can do it via email confirmation. If you have trouble
>> unsubscribing, please send a message to the list detailing the problem.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
> Andrew Sylthe
> KC9ONA
>



-- 
Andrew Sylthe
KC9ONA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140621/e7d9982e/attachment.html>