[App_rpt-users] Server Config is Blank

[Thomas Delmonego]

Thanks to anyone that may have fixed the issue at the AllStar end!

73! Thomas, IW3AMQ

Date: Sat, 21 Jun 2014 11:14:39 -0500
Subject: Re: [App_rpt-users] Server Config is Blank
From: asylthe at kc9ona.com
To: delmonego at hotmail.de
CC: app_rpt-users at ohnosec.org

*UPDATE*
I just ran 'nodesetup.sh' and it worked!
There were no changes made at my end.  Thanks to anyone that may have fixed the issue at the AllStar end.


On Fri, Jun 20, 2014 at 11:09 PM, Andrew Sylthe <asylthe at kc9ona.com> wrote:

Hello All,
I am also experiencing this exact same issue.
Here is the error returned after running 'nodesetup.sh' from the command line:
Failed to download and unpack configuration files
Allstar Link Portal Config Download Failed.. exiting


The nodesetup.sh script has always worked well in the past.  Is this a server issue?  My node is setup properly in the AllStar Portal.

Thanks!



On Wed, Jun 18, 2014 at 9:30 AM, Thomas Delmonego <delmonego at hotmail.de> wrote:





Hi to all,
 
I have the same problem! Also starting the programm "nodesetup.sh" after the failed installation gives the same negative result:


 
Failed to download and unpack configuration files
Allstar Link Portal Config Download Failed.. exiting

And when i try to install another registered server, that's the same. In the past i configured it without problem. Perhaps there's a problem with Allstarlink.org?


 
73! Thomas, IW3AMQ 
Date: Sun, 25 May 2014 22:18:35 +0100
From: email at jonbyrne.com
To: App_rpt-users at ohnosec.org


Subject: [App_rpt-users] Server Config is Blank

Good Evening

I have installed the server and set up and had a node configured on the online portal, however when I run "nodesetup.sh" on the server I get past the login prompt, confirm the server and then the downloads starts.




However it ends with the error

Failed to download and unpack configuration files
Allstar Link Portal Config Download Failed.. exiting


I have tried to walk through each line and as far as I can see the file it downloads is empty, I have tried to download it manually but the tar is empty and has a file sizes of 0 bytes.




Has anyone else had this problem or know how to resolve it?

Thanks
------------
Jon Byrne
​2E0RFU
email at jonbyrne.com


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  

_______________________________________________

App_rpt-users mailing list

App_rpt-users at ohnosec.org

http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"



You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 




-- 
Andrew Sylthe
KC9ONA




-- 
Andrew Sylthe
KC9ONA

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140623/cecb9c44/attachment.html>