[App_rpt-users] Transmit Beeps and ID's without PL tones

[Robert A. Poff WB3AWJ]

This is what I do : 

In rpt.conf : 

Add this into the part where "function=" and such occur : 
startup_macro=*8404 ;Set PL encode on COR 
(or if you have an existing startup_macro tag the *8404 onto the end) 

And this into your function stanza: 
8403=cop,59 ;TX PL on Input only Disable 
8404=cop,58 ;TX PL on Input ONLY ENABLE 

On startup the function will be executed. Or you can turn it on/off at any time with DTMF. 
When you execute cop,58, PL is only encoded when a valid COR (either from the radio or the network) is received. 



From: "Skyler F" <electricity440 at gmail.com> 
To: "rpt-users, app" <app_rpt-users at ohnosec.org> 
Sent: Tuesday, June 24, 2014 11:35:37 AM 
Subject: [App_rpt-users] Transmit Beeps and ID's without PL tones 

Hi, 

Is there any way to transmit the CW ID and the courtesy beeps without PL tone, that is Drop the tone when there is the Beeps and ID's, but still have a transmitting tone other times? 

-- 
Skyler Fennell 
amsatnet.info 
KDØWHB 
electricity440 at gmail.com 

_______________________________________________ 
App_rpt-users mailing list 
App_rpt-users at ohnosec.org 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" 
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140625/ad9007bb/attachment.html>