[App_rpt-users] USB URIx overmodulation problem?

[Tim Sawyer]

Looks like you are driving your radio’s input to hard. Pad it down to where it hits 3Khz with a setting closer to 500.

On Mar 5, 2014, at 9:17 PM, Kevin Oleniczak <n9jpg.ham at gmail.com> wrote:

> I'm using a URIx module with my radio and am in the process of adjusting audio levels. I'm following the well documented procedures to set rx and tx levels but noticed that that choices in txvoice levels have little or no effect. I've made some measurements with my service monitor.
> 
> radio tune txvoice 10  >> 0.35Khz deviation
> radio tune txvoice 14  >> 4.8Khz deviation
> radio tune txvoice 15  >> 4.8Khz deviation
> radio tune txvoice 20  >> 5.2Khz deviation
> radio tune txvoice 100  >> 5.2Khz deviation
> radio tune txvoice 500  >> 5.2Khz deviation
> radio tune txvoice 900  >> 5.2Khz deviation
> 
> With a goal of 3KHz deviation, its not possible through settings alone. Any ideas why this is so touchy?
> 
> thanks
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.