[App_rpt-users] URIx with Icom IC-910 Data Jacks?

[Kevin Oleniczak]

Anyone know if either of the Icom data jacks can be used to work with the
URIx successfully for a simplex node?

Documentation notes this:

DATA IN - Input terminal for data (common for both 1200 and 9600 bps)
GND - Ground line for the DATA IN, DATA OUT and AF OUT.
PTTP - Transmits when this terminal is grounded.
DATA OUT - Received data output terminal for 9600 bps operation.
AF OUT - Received data output terminal for 1200 bps operation.
SQL - Output terminal for squelch condition (Open/Close). Outputs grounded
level signal
when squelch is opened, +8 V level signal when squelch is closed.

I wired it up but not getting tx audio or rx audio to work. Tried using SQL
with the URI COR_DET line. Maybe that's inverted here...

Anyone have luck using this kind of data port to do the interfacing?

thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140313/60da6151/attachment.html>