[App_rpt-users] toggling power on USB buss

[Keith Goobie]

It is for this and other reasons, that we have installed an AC Power
Controller at our site - it is from Digital Loggers and it is found at
http://www.digital-loggers.com/epcr2.html

Keith


On 3/26/14 7:45 AM, "kk6ecm" <kk6ecm at gmail.com> wrote:

> Similar experience here... It seems Asterisk stops talking to the device...
> could be the operating system. sometimes entering "service asterisk restart"
> from the command line works, if not "reboot" from the command line. If all
> else fails, then a hard reboot.
> 
> Hoping to hear from others on this.
> 
> Bob
> kk6ecm
> 
> 
> Sent from iPad
> 
> 
> On Mar 26, 2014, at 7:34 AM, Geoff <ars.w5omr at gmail.com> wrote:
> 
>> I'm seeing info here and there on whether power cycling a USB device
>> (without shutting down the whole system) is possible or not.
>> 
>> On occasion, I have the need to physically walk into the repeater room
>> and check to see if the lights are blinking on the URIx's, because
>> sometimes they -stop-.  (Damnit, Jim - I a radio operator, not a URIx
>> heartbeat cardiologist ;->).
>> 
>> My quick and dirty thought would be to find a way to discover, via
>> software, whether or not a specific URIx had a green-blinking light and
>> if not, power-cycle that usb device.
>> 
>> Anyone have an idea on this?
>> 
>> -Geoff/W5OMR
>> 29655
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
>> the bottom of the page. Enter your email address and press the "Unsubscribe
>> or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to the
>> list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe or
> edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to the
> list detailing the problem.

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA