[App_rpt-users] Incoming link connection volume

[Jim Duuuude]

Well, that's what the erxgain and etxgain (and like parameters for other link types)
are all about. Other network don't have any sort of organized transmission level plans,
and, as a result, your results when connected to them may vary.

Jim

CC: wd0ekr at msn.com; app_rpt-users at ohnosec.org
From: kk6ecm at gmail.com
Subject: Re: [App_rpt-users] Incoming link connection volume
Date: Mon, 26 May 2014 08:19:49 -0700
To: telesistant at hotmail.com

Now that you mention it, it is with Echolink we are having the problem. 
So, what is the other story :-?

Thanks,Bobkk6ecm
Sent from iPad

On May 26, 2014, at 7:57 AM, Jim Duuuude <telesistant at hotmail.com> wrote:




Gosh.. gee... I would have NEVER guessed that he was asking that.....

If you adjust your LOCAL audio levels properly, THIS SHOULDNT HAPPEN!!!
In no way, shape or form, should there be a reason to have to adjust the levels
(inbound or outbound) of other Allstar links. Everyone adjusts their levels to the
same standards. That, in telecom terms, is called a VNL (Via Net Loss) plan
(for transmission levels). We have one. We use it. It works.

If what you are talking about is OTHER networks, such as connections from Echolink, TLB, etc,
that is another story......

Jim WB6NIL

From: wd0ekr at msn.com
To: telesistant at hotmail.com
Subject: Re: [App_rpt-users] Incoming link connection volume
Date: Mon, 26 May 2014 08:50:46 -0600



 

 
 


I think he is asking how to adjust the audio level of the signal coming in 
over the internet, I would like to know how to do that also. The local audio 
levels are fine but the incomming internet audio is high

  ----- 
  Original Message ----- 
  From: 
  Jim 
  Duuuude 
  To: 
  kk6ecm ; 
  app_rpt 
  mailing list 
  Sent: 
  Monday, May 26, 2014 8:45 AM
  Subject: 
  Re: [App_rpt-users] Incoming link connection volume
  

  Sounds like you dont have your rx/tx (local) levels set 
  properly.

Jim


  > From: kk6ecm at gmail.com
> 
  Date: Mon, 26 May 2014 03:43:40 -0700
> To: app_rpt-users at ohnosec.org
> 
  Subject: [App_rpt-users] Incoming link connection volume
> 
> Is 
  there a way to adjust the incoming volume of a connected link? Some 
  connections seem to over drive the transmitter? Normal repeater function works 
  quite well.
> 
> Thanks,
> Bob
> kk6ecm
> 
  
> Sent from iPad
> 
> 
  _______________________________________________
> App_rpt-users mailing 
  list
> App_rpt-users at ohnosec.org
> 
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To 
  unsubscribe from this list please visit 
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to 
  the bottom of the page. Enter your email address and press the "Unsubscribe or 
  edit options button"
> You do not need a password to unsubscribe, you 
  can do it via email confirmation. If you have trouble unsubscribing, please 
  send a message to the list detailing the problem. 
  
_______________________________________________
App_rpt-users 
  mailing 
  list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To 
  unsubscribe from this list please visit 
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to 
  the bottom of the page. Enter your email address and press the "Unsubscribe or 
  edit options button"
You do not need a password to unsubscribe, you can do 
  it via email confirmation. If you have trouble unsubscribing, please send a 
  message to the list detailing the problem. 		 	   		  
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.  		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140526/a1cba180/attachment.html>