[App_rpt-users] How to setup Allstar Monitor

[Tim Sawyer]

ARRG… auto correct. That filename should be allmon.ini.php
--
Tim
:wq

> On Nov 13, 2014, at 9:13 AM, Tim Sawyer <tim.sawyer at mac.com> wrote:
> 
> Allmon 2 changed the ini filename to almond.ini.php
> --
> Tim
> :wq
> 
>> On Nov 13, 2014, at 7:56 AM, Skyler F <electricity440 at gmail.com <mailto:electricity440 at gmail.com>> wrote:
>> 
>> Ok, so I put the allmon-2 folder and ran it, and renamed allmon.ini.txt to allmon.ini. It still says "could not load allmon.ini" though, unlike with allmon 1.
>> 
>> Do I need to forward port 5038 to work? And where it says to use "yourhost.com <http://yourhost.com/>", I have a dynamic dns server kd0whb.duckdns.org <http://kd0whb.duckdns.org/>, is that what I should use? Is the username root and password the password to login to the node?
>> 
>> Skyler KDØWHB
>> 
>> On Wed, Nov 12, 2014 at 4:35 PM, Corey Dean <n3fe at repeater.net <mailto:n3fe at repeater.net>> wrote:
>> I second this...  I have wanted to see this work for some time now but as stated it only does the commands and doesn't show the connected nodes.  I really wish it did as I use the xipar voting and that would be great to see on allmon or something similar...
>> 
>> Corey N3FE
>> 
>> On Nov 12, 2014, at 6:16 PM, Stephen Curtis <steve at m0hoy.com <mailto:steve at m0hoy.com>> wrote:
>> 
>>> I could not get Allmon to work with Xipar. You are able to connect and disconnect nodes but it will not populate the table with information on what nodes are connected. However, if there is anyone out there who has managed to get it working I would also like to know how!
>>> 
>>> Thanks
>>> Steve 
>>> M0HOY
>>> 
>>> 
>>> 
>>> 
>>>> On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>>>> 
>>>> I think it will work with Xipar as it’s merely an Asterisk Manager Interface client. Maybe someone here on the list can confirm. 
>>>> --
>>>> Tim
>>>> :wq
>>>> 
>>>>> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net <mailto:vencl at att.net>> wrote:
>>>>> 
>>>>> Tim
>>>>> Will this work with xipar nodes?
>>>>> 
>>>>> Lu Vencl
>>>>> 
>>>>> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>>>>> 
>>>>>> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2 <https://github.com/tsawyer/allmon/tree/allmon2>
>>>>>> --
>>>>>> Tim
>>>>>> :wq
>>>>>> 
>>>>>>> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net <mailto:kb2ear at kb2ear.net>> wrote:
>>>>>>> 
>>>>>>> So where is allmon v2 being hosted?
>>>>>>> 
>>>>>>> Thanks & 73,
>>>>>>> Scott KB2EAR
>>>>>>> 
>>>>>>> On 2014-11-12 09:25, Tim Sawyer wrote:
>>>>>> 
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>>>> 
>>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>> 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>> 
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> 
>> 
>> 
>> -- 
>> Skyler Fennell
>> amsatnet.info <http://amsatnet.info/>
>> KDØWHB
>> electricity440 at gmail.com <mailto:electricity440 at gmail.com>_______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141113/56a94028/attachment.html>