[App_rpt-users] Fwd: EchoLink Policy Reminder

Thu Sep 4 15:05:58 UTC 2014

a good options is disable echolink only a call from webtransceiver is
active and then enable when the webstransceiver isnt active

El jueves, 4 de septiembre de 2014, Bryan D. Boyle <bdboyle at bdboyle.com>
escribió:

> Alternative (since it does have a use...) is to register a node, assign
> the echolink channel to it, but leave it disconnected unless it's needed
> (dummy load node?)
>
> write a couple scripts that use the allstar management interface to
> control the node, and build a smartphone-compatible web interface to it.
>  :)  it's what i have on my node cluster.
>
> That way, you can raise the echo node when YOU need it, and take it down
> when you don't.
>
> Echolink is ancient technology, hasn't been updated in over a decade, but
> is not entirely worthless, regardless of what the League thinks.  I do find
> it marginally useful when out of range of the NJ/PA network, but am
> circumspect in how it gets used.
>
> Maybe most of the clueless (l)users aren't, but I'm thinking the combined
> cerebral power of this list isn't in that camp.
>
> --
> Bryan
> Sent from my iPhone 5...No electrons were harmed in the sending of this
> message.
>
>
>
> On Sep 4, 2014, at 7:51, Lu Vencl <vencl at att.net
> <javascript:_e(%7B%7D,'cvml','vencl at att.net');>> wrote:
>
> Allstar is not an enforcement bureau. Neither is Icom, Yeasu, etc. If
> anyone is on the air without a proper license, I think most of us as hams
> are capable in knowing what to do. It's not difficult.
> Personally I am glad to be on a network with rich audio and away from the
> other undesirable nonsense.  I have echolink setup but know with an allow
> list for emergencies only.
> Otherwise I would just pull it.
>
> Lu Vencl
>
> On Sep 4, 2014, at 4:05 AM, Jon Byrne <email at jonbyrne.com
> <javascript:_e(%7B%7D,'cvml','email at jonbyrne.com');>> wrote:
>
> Morning All
>
> Apparently Echolink did a test and Allstarlink allowed them to register a
> call sign without providing a copy of a valid license, they just needed the
> Postal and Email address. This is not the way it works for UK License
> holders, we have to send a copy of our license but is it for US Stations?
>
> Regards
>
> Jon
> 2E0RFU
>
> ------------
> Jon Byrne
> email at jonbyrne.com <javascript:_e(%7B%7D,'cvml','email at jonbyrne.com');>
>
>
> On 3 September 2014 18:41, Loren Tedford <lorentedford at gmail.com
> <javascript:_e(%7B%7D,'cvml','lorentedford at gmail.com');>> wrote:
>
>> I got the email too not sure what to think..
>>
>> Loren Tedford (KC9ZHV)
>> Email: lorentedford at gmail.com
>> <javascript:_e(%7B%7D,'cvml','lorentedford at gmail.com');>
>> Email: lorentedford at live.com
>> <javascript:_e(%7B%7D,'cvml','lorentedford at live.com');>
>> Email: lorentedford at aol.com
>> <javascript:_e(%7B%7D,'cvml','lorentedford at aol.com');>
>> Email: LorenCS at Ltcraft.net
>> <javascript:_e(%7B%7D,'cvml','LorenCS at Ltcraft.net');>
>> Email: lorentedford at yahoo.com
>> <javascript:_e(%7B%7D,'cvml','lorentedford at yahoo.com');>
>> Email: loren at lorentedford.com
>> <javascript:_e(%7B%7D,'cvml','loren at lorentedford.com');>
>> Email: loren at richlandcountycomputers.com
>> <javascript:_e(%7B%7D,'cvml','loren at richlandcountycomputers.com');>
>> Phone: 618-553-0806
>> http://www.lorentedford.com
>> http://www.Ltcraft.net <http://www.ltcraft.net/>
>> http://www.richlandcountycomputers.com
>> http://kc9zhv.lorentedford.com
>>
>>
>>
>> On Wed, Sep 3, 2014 at 9:55 AM, Buddy Brannan <buddy at brannan.name
>> <javascript:_e(%7B%7D,'cvml','buddy at brannan.name');>> wrote:
>>
>>> I wonder if anyone else got this Email?
>>>
>>> I have my Echlin attached to an Allstar node number that only is Echlin.
>>> The RF link, which also allows dial in via All Star web transceiver or
>>> phone, stays connected to the Echlin All Star node number most of the time,
>>> but I can drop that at will. Moreover, I think I've turned off any access
>>> to the web transceiver or phone gateway to the Echlin node number. Is there
>>> anything else I need to do to be in compliance?
>>>
>>> As a side note, all of these regulations against interconnecting systems
>>> are getting kind of ridiculous.
>>>
>>> --
>>> Buddy Brannan, KB5ELV - Erie, PA
>>> Phone: 814-860-3194
>>> Mobile: 814-431-0962
>>> Email: buddy at brannan.name
>>> <javascript:_e(%7B%7D,'cvml','buddy at brannan.name');>
>>>
>>>
>>>
>>> > Begin forwarded message:
>>> >
>>> > From: "EchoLink Support" <support at echolink.org
>>> <javascript:_e(%7B%7D,'cvml','support at echolink.org');>>
>>> > Subject: EchoLink Policy Reminder
>>> > To: "EchoLink Node Operators" <>
>>> >
>>> > We wanted to remind you of an important item in EchoLink's access
>>> policies (which can be found online at
>>> http://www.echolink.org/access_policies.htm).
>>> >
>>> > In general, EchoLink does not permit cross-linking.
>>> >
>>> > More specifically, EchoLink does not permit cross-linking with other
>>> VoIP systems that can be accessed off-the-air (for example, directly from a
>>> PC or Web browser).  This is because other systems may have a validation
>>> procedure that is far less comprehensive than EchoLink's, and we want to
>>> continue to ensure that EchoLink is solely for use by licensed Amateur
>>> Radio operators around the world.
>>> >
>>> > Therefore, while excellent systems such as Zello, AllStar, eQSO,
>>> WIRES-II, etc. all serve an important purpose within the Amateur Radio
>>> community, our policy is that they cannot be directly connected to a
>>> registered EchoLink node.
>>> >
>>> > In other words, your node must function only as a direct RF gateway,
>>> and not as a cross-link to another system. If your node is reachable
>>> through another path, that path must be disabled when an EchoLink
>>> connection is in progress. For example, an EchoIRLP node is permitted,
>>> since it functions only as an RF gateway when an EchoLink connection is
>>> made.
>>> >
>>> > If you are running Asterisk with app_rpt and an EchoLink channel, be
>>> sure it is configured not to allow other VoIP connections when an EchoLink
>>> station is connected. If this isn't practical, please disable the EchoLink
>>> channel.
>>> >
>>> > Thanks for ensuring that your node adheres to this policy. In some
>>> cases we do restrict logins to be sure the policy is being followed.
>>> >
>>> > 73
>>> > EchoLink Support
>>> >
>>> > (Note: This mailbox is not able to handle replies. For help and
>>> information, please see www.echolink.org/support.htm)
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> <javascript:_e(%7B%7D,'cvml','App_rpt-users at ohnosec.org');>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> <javascript:_e(%7B%7D,'cvml','App_rpt-users at ohnosec.org');>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> <javascript:_e(%7B%7D,'cvml','App_rpt-users at ohnosec.org');>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> <javascript:_e(%7B%7D,'cvml','App_rpt-users at ohnosec.org');>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>

-- 
Enviado desde EA8EE red movil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140904/0fad5a0f/attachment.html>