[App_rpt-users] App_rpt-users Digest, Vol 67, Issue 65

[Brian Burton]

In xipar its

txrxdelay= 20 ms intervals.

AB3AA-Brian
On Sep 22, 2014 12:00 PM, <app_rpt-users-request at ohnosec.org> wrote:

> Send App_rpt-users mailing list submissions to
>         app_rpt-users at ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
>         app_rpt-users-request at ohnosec.org
>
> You can reach the person managing the list at
>         app_rpt-users-owner at ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
>    1. Re: RXDELAY in XIPAR (Lu Vencl)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 22 Sep 2014 10:07:48 -0400
> From: Lu Vencl <vencl at att.net>
> To: Tim Sawyer <tim.sawyer at mac.com>
> Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>,
>         "webmaster at n4yza.com" <webmaster at n4yza.com>
> Subject: Re: [App_rpt-users] RXDELAY in XIPAR
> Message-ID: <46719A95-463D-4B06-B7F6-6CDEB348E7FF at att.net>
> Content-Type: text/plain; charset="utf-8"
>
> Just made it long to test. But not effective. Probably only need 150 ms.
>
> Lu Vencl
>
> > On Sep 22, 2014, at 9:46 AM, Tim Sawyer <tim.sawyer at mac.com> wrote:
> >
> > Really? You need a 3 second delay?
> > --
> > Tim WD6AWP
> >
> >> On Sep 22, 2014, at 5:13 AM, Lu Vencl <vencl at att.net> wrote:
> >>
> >> I have a XIPAR node that needs a little support with pulseback removal.
> Never had to utilize this before, but when looking in URD.conf, I don?t see
> the rxdelay= parameter like I do on ACID builds. I went ahead and inserted
> the command into the file, but there does not seem to be any action.
> >> Can someone confirm the parameter and placement?
> >> Here is my example:
> >> [usb]
> >>
> >> hdwtype=0           ; 0=std,1=dev
> >> eeprom=0            ; unless you have a cable w/eeprom
> >> duplex=0            ; 0=simplex, 1=duplex
> >> invertptt=0
> >> ;minsigproc=0        ; minimal signal processing
> >> ;sendvoter=0        ; 0=default, no voter rssi, 1=enable voter rssi
> >>
> >> carrierfrom=usbinvert     ; no,usb,usbinvert,dsp,vox
> >> ctcssfrom=no        ; no,usb,dsp
> >> rxondelay=3000              ; Gets rid of the pulseback problem
> >> ;rxboost=1           ; rx input boost of 20dB
> >> rxboost=0            ; no boost
> >> rxdemod=flat        ; no,speaker,flat
> >> txprelim=0          ; 1 = pre-emphasize and limit
> >>
> >> txmixa=voice        ; no,voice,tone,composite
> >> txmixb=tone         ; no,voice,tone,composite,auxvoice
> >>
> >> ;txctcssdefault=77.0
> >> ;rxctcssfreqs=77.0;
> >> ;txctcssfreqs=77.0;
> >> txtoctype=notone;
> >>
> >> rxsquelchdelay=900    ; delayline in ms carrier squelch tail eliminator
> >> rxnoisefiltype=0    ; 0 for +/-5KHz, 2 for +/-2.5KHz systems
> >>
> >>
> >> Lu,
> >> KA4EPS
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at ohnosec.org
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> >> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20140922/20917ad4/attachment-0001.html
> >
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> End of App_rpt-users Digest, Vol 67, Issue 65
> *********************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140922/5c890d4b/attachment.html>