[App_rpt-users] Not able to receive incoming connections

Wed Sep 24 14:05:28 UTC 2014

You node is not reporting to the allstar server. First make sure you 
have these lines uncommented in your node:

statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null 
; Get the system list for this server
statpost_url=http://stats.allstarlink.org/uhandler.php

And then make sure you /etc/resolv.conf  file has a valid namserver in 
it if your box is on a static IP.

nameserver 8.8.8.8

Then if you node statrs to report to the Allstar site then after 15 min 
or so nodes should be able to connect.

This assumes you do have all the ports properly forwarded in your router.

Jon

On 9/24/2014 2:36 AM, Doug Crompton wrote:
> Gene,
>
>  There is no way to "force" something through a router that is 
> miss-configured or not working correctly.
>
> In the router you should be able to port forward and you need the 
> following ports forwarded
>
> 4569 udp
> 222 tcp
>
> It is important that you specify udp and tcp. In some case you can say 
> 'both'
>
> Both ports should be forwarded to your Allstar box IP address. Without 
> 4569 no one will be able to connect to you. Without 222 no one will be 
> able to administratively connect to your allstar.
>
> There is no way around this you need the forwards to work. In a pinch 
> you could setup DMZ in the router to the allstar box and see if it 
> works. If it doesn't you have other problems but if it does then you 
> know you port forwarding is incorrect.
>
> I don't know your router but there is probably someone else on here 
> that could help. I know with the Verizon FIOS routers you need specify 
> the from port and IP as any and the to port and Ip as the ones you 
> want it to go to. Specifying the from port as a specific number even 
> if it is the right number does not work.
>
>
> *73 Doug
> WA3DSP
> http://www.crompton.com/hamradio*
>
>
> ------------------------------------------------------------------------
> From: gene at wb9coy.com
> To: doug at crompton.com
> CC: app_rpt-users at ohnosec.org
> Subject: RE: [App_rpt-users] Not able to receive incoming connections
> Date: Tue, 23 Sep 2014 22:37:21 -0700
>
> Hi Doug, thanks for the response.  My router is an ATT U-Verse
> I have NAT to port 4569  and 222. For some reason I can not connect to 
> it.  It shows up on the Web Xcvr.  I am able to have QSOs on node 
> 2003.  I think it is an in-bound issue.   I read on the AllStar pages 
> that a sys admin might have to force  port 4569 on the AllStar side.  
> I am writting to this mail list because I am stuck on why I can not 
> conntec to my node which is 41303
>
>     -------- Original Message --------
>     Subject: RE: [App_rpt-users] Not able to receive incoming connections
>     From: Doug Crompton <doug at crompton.com <mailto:doug at crompton.com>>
>     Date: Tue, September 23, 2014 4:38 pm
>     To: "gene at wb9coy.com <mailto:gene at wb9coy.com>" <gene at wb9coy.com
>     <mailto:gene at wb9coy.com>>
>     Cc: "app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>"
>     <app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>>
>
>     Gene,
>
>      Not sure what you mean by forced but you need to port foward port
>     4569 upd  to the IP address of your Allstar computer. The Allstar
>     computer should be set as a static IP address on your local
>     network so that the local address does not change.
>
>     In addition if you want to access your system remotely or have
>     someone else do it for maintenance you need to port forward port
>     222 tcp to the IP address of your Allstar computer.
>
>     *73 Doug
>     WA3DSP
>     http://www.crompton.com/hamradio*
>
>
>     > From:gene at wb9coy.com <mailto:gene at wb9coy.com>
>     > To: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
>     > Date: Tue, 23 Sep 2014 15:34:22 -0700
>     > Subject: [App_rpt-users] Not able to receive incoming connections
>     >
>     > My node is 41303 W6QAR
>     >
>     > I have verified that I NAT on port 4569. It was mentioned that a
>     check
>     > can be done on my node to see if it had to be forced.
>     >
>     > _______________________________________________
>     > App_rpt-users mailing list
>     > App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>     > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>     >
>     > To unsubscribe from this list please visit
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>     scroll down to the bottom of the page. Enter your email address
>     and press the "Unsubscribe or edit options button"
>     > You do not need a password to unsubscribe, you can do it via
>     email confirmation. If you have trouble unsubscribing, please send
>     a message to the list detailing the problem.
>     >
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140924/6b7188ba/attachment.html>