[App_rpt-users] Play audio file based on node numbers connected

[Tim Sawyer]

There is a command for that called ilink,5. Which touch tone command your system uses for that command is optional. Look through your rpt.conf for ilink,5 and you may see something like 

70=ilink,5 ; say link status

In this case the touch tone command is *70. If the above line or similar is not there you can add it or one like it. Then restart Asterisk. Now when you play *70 it will read the node ‘numbers’  that are connected to you. 

To get it to say “Win system” instead of “Node 2560” you have to make a recording and place in in the correct directory. That is documented here: http://docs.allstarlink.org/drupal/node/131 <http://docs.allstarlink.org/drupal/node/131> and here http://images.ohnosec.org/app-rpt-audacity.pdf <http://images.ohnosec.org/app-rpt-audacity.pdf>
--
Tim
:wq

> On Apr 6, 2015, at 1:23 PM, Eric Guth <eric at efratnetworks.com> wrote:
> 
> How would I play an audio file based on a node connected, either when I make the connection, or upon interrogation.  
>  
> Such as:  "connected to W3WAN, receive only", or "connected to "winsystem, Transceive". 
>  
> This way if someone is monitoring a channel, I can poll the system for status. 
>  
> My apology if this has been asked before. 
>  
> 73, 
>  
> Eric 
> 4Z1UG / WA6IGR
> Allstar Node: 28422
> Check out my Podcast at: www.qsotoday.com <http://www.qsotoday.com/>
> 4Z1UG at guth.us <mailto:4Z1UG at guth.us>
> Israel Direct: 077-950-9451
> USA Direct: +1-720-377-3840
> 
> Skype:  ericrguth
> 
>  
>  
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150406/f418a5ec/attachment.html>