[App_rpt-users] Play audio file based on node numbers connected

[Eric Guth]

Thanks Tim and Kyle for your responses.  I now know how to start.

73,

Eric
4Z1UG / WA6IGR
Allstar Node: 28422
Check out my Podcast at: www.qsotoday.com<http://www.qsotoday.com>
4Z1UG at guth.us<mailto:4Z1UG at guth.us>

Israel Direct: 077-950-9451
USA Direct: +1-720-377-3840

Skype:  ericrguth

From: Tim Sawyer [mailto:tim.sawyer at mac.com]
Sent: Tuesday, April 07, 2015 12:53 AM
To: Eric Guth
Cc: app_rpt-users
Subject: Re: [App_rpt-users] Play audio file based on node numbers connected

There is a command for that called ilink,5. Which touch tone command your system uses for that command is optional. Look through your rpt.conf for ilink,5 and you may see something like

70=ilink,5 ; say link status

In this case the touch tone command is *70. If the above line or similar is not there you can add it or one like it. Then restart Asterisk. Now when you play *70 it will read the node ‘numbers’  that are connected to you.

To get it to say “Win system” instead of “Node 2560” you have to make a recording and place in in the correct directory. That is documented here: http://docs.allstarlink.org/drupal/node/131 and here http://images.ohnosec.org/app-rpt-audacity.pdf
--
Tim
:wq

On Apr 6, 2015, at 1:23 PM, Eric Guth <eric at efratnetworks.com<mailto:eric at efratnetworks.com>> wrote:

How would I play an audio file based on a node connected, either when I make the connection, or upon interrogation.

Such as:  "connected to W3WAN, receive only", or "connected to "winsystem, Transceive".

This way if someone is monitoring a channel, I can poll the system for status.

My apology if this has been asked before.

73,

Eric
4Z1UG / WA6IGR
Allstar Node: 28422
Check out my Podcast at: www.qsotoday.com<http://www.qsotoday.com/>
4Z1UG at guth.us<mailto:4Z1UG at guth.us>
Israel Direct: 077-950-9451
USA Direct: +1-720-377-3840
Skype:  ericrguth


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150407/e36c53b8/attachment.html>