[App_rpt-users] Node registration issue

[Jamey Wright]

I had a similar issue when I set my node up.  In my case I was behind a NAT device (Cisco Firewall) and although I had the proper ports forwarded to my server, I had forgotten to build the global pool for that particular NAT'd address.  SSH and connect worked, but it was not registering correctly because connections were being accepted on one IP address and it was reporting back to the registration server using a different IP address.

Jamey
WR4JW
________________________________________
From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] on behalf of Kevin Custer [kuggie at kuggie.com]
Sent: Thursday, April 23, 2015 8:32 PM
To: App_rpt-users at ohnosec.org
Subject: [App_rpt-users] Node registration issue

I have a node that is behind a NAT router that has trouble registering.
Not all the time - just sometimes...  The following ports are forwarded
in the router, 4569, 22.  Yes, ssh access was changed to 22.

The node connects to other nodes that are in the 'phone book'.  I can
putty to the node just fine.  What am I missing?

Kevin
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.